Hi,
I include log from coreboot startup on EPIA MII with 1.2GHz C3 processor. First of all it fails to run my FILO payload, second, I noticed it may fail on RAM check-up, it sees only 16MB out of 256 or 512 (tried both) Furthermore, I have to wait about 10 sec form power cycle for coreboot to send anything through serial line. Any ideas?
Thanks in advance.
Here's the log:
coreboot-2.0.0.0-Fallback Sat Feb 16 00:26:20 CST 2008 starting... In auto.c:main() Enabling mainboard devices Enabling shadow ram vt8623 init starting Detecting Memory Number of Banks 04 Number of Rows 0d Priamry DRAM width08 No Columns 0a MA type e0 Bank 0 (*16 Mb) 10 No Physical Banks 01 Total Memory (*16 Mb) 10 CAS Supported 2 2.5 3 Cycle time at CL X (nS)50 Cycle time at CL X-0.5 (nS)60 Cycle time at CL X-1 (nS)75 Starting at CAS 3 We can do CAS 2.5 We can do CAS 2 tRP 3c tRCD 3c tRAS 28 Low Bond 09 High Bonddc Setting DQS delay95vt8623 done 00:06 11 23 31 06 00 30 22 00 00 00 06 00 00 00 00 10:08 00 00 d0 00 00 00 00 00 00 00 00 00 00 00 00 20:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30:00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00 40:00 18 88 80 82 44 00 00 18 99 88 80 82 44 00 00 50:c8 de cf 88 e0 07 00 00 e0 00 10 10 10 10 00 00 60:02 ff 00 30 52 32 01 20 42 2d 43 58 00 44 00 00 70:82 48 00 01 01 08 50 00 01 00 00 00 00 00 10 00 80:0f 6c 00 00 80 00 00 00 02 00 00 00 00 00 00 00 90:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0:02 c0 20 00 07 02 00 1f 04 00 00 00 2f 02 04 00 b0:00 00 00 00 80 00 00 00 86 00 00 04 00 00 00 00 c0:01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 d0:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0:00 dd 00 00 00 00 01 00 40 00 00 00 00 00 00 00 f0:00 00 00 00 00 00 12 13 00 00 00 00 00 00 00 00 AGP Doing MTRR init. Leaving auto.c:main() Copying coreboot to RAM. Jumping to coreboot. coreboot-2.0.0.0-Fallback Sat Feb 16 00:26:20 CST 2008 booting... clocks_per_usec: 2358 Enumerating buses... Finding PCI configuration type. Disabling static device: PCI: 00:10.3 done Allocating resources... Reading resources... Done reading resources. Setting resources... Done setting resources. Done allocating resources. Enabling resources... done. Initializing devices... Initializing CPU #0 Enabling cache Disabling local apic...done. CPU #0 Initialized pci_routing_fixup: dev is 000103b8 setting firewire setting usb setting vt8235 setting ethernet setting vga setting pci slot setting cardbus slot setting riser slot Enabling VIA IDE. ide_init: enabling compatibility IDE addresses BIOSINT: Unsupport int #0x10 Devices initialized Copying IRQ routing tables to 0xf0000...done. Verifing copy of IRQ routing tables at 0xf0000...done Checking IRQ routing table consistency... done. ACPI: Writing ACPI tables at f0400... ACPI: done.
Welcome to elfboot, the open sourced starter. January 2002, Eric Biederman. Version 1.3
Can not load ELF Image.