Author: rminnich Date: 2007-06-27 21:57:48 +0200 (Wed, 27 Jun 2007) New Revision: 377
Modified: LinuxBIOSv3/include/arch/x86/amd_geodelx.h Log: AMD geode defines. Signed-off-by: Ronald G. Minnich rminnich@gmail.com Acked-by: Stefan Reinauer stepan@coresystems.de
Modified: LinuxBIOSv3/include/arch/x86/amd_geodelx.h =================================================================== --- LinuxBIOSv3/include/arch/x86/amd_geodelx.h 2007-06-27 19:56:32 UTC (rev 376) +++ LinuxBIOSv3/include/arch/x86/amd_geodelx.h 2007-06-27 19:57:48 UTC (rev 377) @@ -559,4 +559,687 @@ #define DCACHE_RAM_SIZE 0x08000 #define DCACHE_RAM_BASE 0xc8000
+/* POST CODES */ +/* standard AMD post definitions -- might as well use them. */ + +#define POST_Output_Port (0x080) /* port to write post codes to*/ + +#define POST_preSioInit (0x000) /* geode.asm*/ +#define POST_clockInit (0x001) /* geode.asm*/ +#define POST_CPURegInit (0x002) /* geode.asm*/ +#define POST_UNREAL (0x003) /* geode.asm*/ +#define POST_CPUMemRegInit (0x004) /* geode.asm*/ +#define POST_CPUTest (0x005) /* geode.asm*/ +#define POST_memSetup (0x006) /* geode.asm*/ +#define POST_memSetUpStack (0x007) /* geode.asm*/ +#define POST_memTest (0x008) /* geode.asm*/ +#define POST_shadowRom (0x009) /* geode.asm*/ +#define POST_memRAMoptimize (0x00A) /* geode.asm*/ +#define POST_cacheInit (0x00B) /* geode.asm*/ +#define POST_northBridgeInit (0x00C) /* geode.asm*/ +#define POST_chipsetInit (0x00D) /* geode.asm*/ +#define POST_sioTest (0x00E) /* geode.asm*/ +#define POST_pcATjunk (0x00F) /* geode.asm*/ + + +#define POST_intTable (0x010) /* geode.asm*/ +#define POST_memInfo (0x011) /* geode.asm*/ +#define POST_romCopy (0x012) /* geode.asm*/ +#define POST_PLLCheck (0x013) /* geode.asm*/ +#define POST_keyboardInit (0x014) /* geode.asm*/ +#define POST_cpuCacheOff (0x015) /* geode.asm*/ +#define POST_BDAInit (0x016) /* geode.asm*/ +#define POST_pciScan (0x017) /* geode.asm*/ +#define POST_optionRomInit (0x018) /* geode.asm*/ +#define POST_ResetLimits (0x019) /* geode.asm*/ +#define POST_summary_screen (0x01A) /* geode.asm*/ +#define POST_Boot (0x01B) /* geode.asm*/ +#define POST_SystemPreInit (0x01C) /* geode.asm*/ +#define POST_ClearRebootFlag (0x01D) /* geode.asm*/ +#define POST_GLIUInit (0x01E) /* geode.asm*/ +#define POST_BootFailed (0x01F) /* geode.asm*/ + + +#define POST_CPU_ID (0x020) /* cpucpuid.asm*/ +#define POST_COUNTERBROKEN (0x021) /* pllinit.asm*/ +#define POST_DIFF_DIMMS (0x022) /* pllinit.asm*/ +#define POST_WIGGLE_MEM_LINES (0x023) /* pllinit.asm*/ +#define POST_NO_GLIU_DESC (0x024) /* pllinit.asm*/ +#define POST_CPU_LCD_CHECK (0x025) /* pllinit.asm*/ +#define POST_CPU_LCD_PASS (0x026) /* pllinit.asm*/ +#define POST_CPU_LCD_FAIL (0x027) /* pllinit.asm*/ +#define POST_CPU_STEPPING (0x028) /* cpucpuid.asm*/ +#define POST_CPU_DM_BIST_FAILURE (0x029) /* gx2reg.asm*/ +#define POST_CPU_FLAGS (0x02A) /* cpucpuid.asm*/ +#define POST_CHIPSET_ID (0x02b) /* chipset.asm*/ +#define POST_CHIPSET_ID_PASS (0x02c) /* chipset.asm*/ +#define POST_CHIPSET_ID_FAIL (0x02d) /* chipset.asm*/ +#define POST_CPU_ID_GOOD (0x02E) /* cpucpuid.asm*/ +#define POST_CPU_ID_FAIL (0x02F) /* cpucpuid.asm*/ + + + +/* PCI config*/ +#define P80_PCICFG (0x030) /* pcispace.asm*/ + + +/* PCI io*/ +#define P80_PCIIO (0x040) /* pcispace.asm*/ + + +/* PCI memory*/ +#define P80_PCIMEM (0x050) /* pcispace.asm*/ + + +/* SIO*/ +#define P80_SIO (0x060) /* *sio.asm*/ + +/* Memory Setp*/ +#define P80_MEM_SETUP (0x070) /* docboot meminit*/ +#define POST_MEM_SETUP (0x070) /* memsize.asm*/ +#define ERROR_32BIT_DIMMS (0x071) /* memsize.asm*/ +#define POST_MEM_SETUP2 (0x072) /* memsize.asm*/ +#define POST_MEM_SETUP3 (0x073) /* memsize.asm*/ +#define POST_MEM_SETUP4 (0x074) /* memsize.asm*/ +#define POST_MEM_SETUP5 (0x075) /* memsize.asm*/ +#define POST_MEM_ENABLE (0x076) /* memsize.asm*/ +#define ERROR_NO_DIMMS (0x077) /* memsize.asm*/ +#define ERROR_DIFF_DIMMS (0x078) /* memsize.asm*/ +#define ERROR_BAD_LATENCY (0x079) /* memsize.asm*/ +#define ERROR_SET_PAGE (0x07a) /* memsize.asm*/ +#define ERROR_DENSITY_DIMM (0x07b) /* memsize.asm*/ +#define ERROR_UNSUPPORTED_DIMM (0x07c) /* memsize.asm*/ +#define ERROR_BANK_SET (0x07d) /* memsize.asm*/ +#define POST_MEM_SETUP_GOOD (0x07E) /* memsize.asm*/ +#define POST_MEM_SETUP_FAIL (0x07F) /* memsize.asm*/ + + +#define POST_UserPreInit (0x080) /* geode.asm*/ +#define POST_UserPostInit (0x081) /* geode.asm*/ +#define POST_Equipment_check (0x082) /* geode.asm*/ +#define POST_InitNVRAMBX (0x083) /* geode.asm*/ +#define POST_NoPIRTable (0x084) /* pci.asm*/ +#define POST_ChipsetFingerPrintPass (0x085) /* prechipsetinit*/ +#define POST_ChipsetFingerPrintFail (0x086) /* prechipsetinit*/ +#define POST_CPU_IM_TAG_BIST_FAILURE (0x087) /* gx2reg.asm*/ +#define POST_CPU_IM_DATA_BIST_FAILURE (0x088) /* gx2reg.asm*/ +#define POST_CPU_FPU_BIST_FAILURE (0x089) /* gx2reg.asm*/ +#define POST_CPU_BTB_BIST_FAILURE (0x08a) /* gx2reg.asm*/ +#define POST_CPU_EX_BIST_FAILURE (0x08b) /* gx2reg.asm*/ +#define POST_Chipset_PI_Test_Fail (0x08c) /* prechipsetinit*/ +#define POST_Chipset_SMBus_SDA_Test_Fail (0x08d) /* prechipsetinit*/ +#define POST_BIT_CLK_Fail (0x08e) /* Hawk geode.asm override*/ + + +#define POST_STACK_SETUP (0x090) /* memstack.asm*/ +#define POST_CPU_PF_BIST_FAILURE (0x091) /* gx2reg.asm*/ +#define POST_CPU_L2_BIST_FAILURE (0x092) /* gx2reg.asm*/ +#define POST_CPU_GLCP_BIST_FAILURE (0x093) /* gx2reg.asm*/ +#define POST_CPU_DF_BIST_FAILURE (0x094) /* gx2reg.asm*/ +#define POST_CPU_VG_BIST_FAILURE (0x095) /* gx2reg.asm*/ +#define POST_CPU_VIP_BIST_FAILURE (0x096) /* gx2reg.asm*/ +#define POST_STACK_SETUP_PASS (0x09E) /* memstack.asm*/ +#define POST_STACK_SETUP_FAIL (0x09F) /* memstack.asm*/ + + +#define POST_PLL_INIT (0x0A0) /* pllinit.asm*/ +#define POST_PLL_MANUAL (0x0A1) /* pllinit.asm*/ +#define POST_PLL_STRAP (0x0A2) /* pllinit.asm*/ +#define POST_PLL_RESET_FAIL (0x0A3) /* pllinit.asm*/ +#define POST_PLL_PCI_FAIL (0x0A4) /* pllinit.asm*/ +#define POST_PLL_MEM_FAIL (0x0A5) /* pllinit.asm*/ +#define POST_PLL_CPU_VER_FAIL (0x0A6) /* pllinit.asm*/ + + +#define POST_MEM_TESTMEM (0x0B0) /* memtest.asm*/ +#define POST_MEM_TESTMEM1 (0x0B1) /* memtest.asm*/ +#define POST_MEM_TESTMEM2 (0x0B2) /* memtest.asm*/ +#define POST_MEM_TESTMEM3 (0x0B3) /* memtest.asm*/ +#define POST_MEM_TESTMEM4 (0x0B4) /* memtest.asm*/ +#define POST_MEM_TESTMEM_PASS (0x0BE) /* memtest.asm*/ +#define POST_MEM_TESTMEM_FAIL (0x0BF) /* memtest.asm*/ + + +#define POST_SECUROM_SECBOOT_START (0x0C0) /* secstart.asm*/ +#define POST_SECUROM_BOOTSRCSETUP (0x0C1) /* secstart.asm*/ +#define POST_SECUROM_REMAP_FAIL (0x0C2) /* secstart.asm*/ +#define POST_SECUROM_BOOTSRCSETUP_FAIL (0x0C3) /* secstart.asm*/ +#define POST_SECUROM_DCACHESETUP (0x0C4) /* secstart.asm*/ +#define POST_SECUROM_DCACHESETUP_FAIL (0x0C5) /* secstart.asm*/ +#define POST_SECUROM_ICACHESETUP (0x0C6) /* secstart.asm*/ +#define POST_SECUROM_DESCRIPTORSETUP (0x0C7) /* secstart.asm*/ +#define POST_SECUROM_DCACHESETUPBIOS (0x0C8) /* secstart.asm*/ +#define POST_SECUROM_PLATFORMSETUP (0x0C9) /* secstart.asm*/ +#define POST_SECUROM_SIGCHECKBIOS (0x0CA) /* secstart.asm*/ +#define POST_SECUROM_ICACHESETUPBIOS (0x0CB) /* secstart.asm*/ +#define POST_SECUROM_PASS (0x0CC) /* secstart.asm*/ +#define POST_SECUROM_FAIL (0x0CD) /* secstart.asm*/ + +#define POST_RCONFInitError (0x0CE) /* cache.asm*/ +#define POST_CacheInitError (0x0CF) /* cache.asm*/ + + +#define POST_ROM_PREUNCOMPRESS (0x0D0) /* rominit.asm*/ +#define POST_ROM_UNCOMPRESS (0x0D1) /* rominit.asm*/ +#define POST_ROM_SMM_INIT (0x0D2) /* rominit.asm*/ +#define POST_ROM_VID_BIOS (0x0D3) /* rominit.asm*/ +#define POST_ROM_LCDINIT (0x0D4) /* rominit.asm*/ +#define POST_ROM_SPLASH (0x0D5) /* rominit.asm*/ +#define POST_ROM_HDDINIT (0x0D6) /* rominit.asm*/ +#define POST_ROM_SYS_INIT (0x0D7) /* rominit.asm*/ +#define POST_ROM_DMM_INIT (0x0D8) /* rominit.asm*/ +#define POST_ROM_TVINIT (0x0D9) /* rominit.asm*/ +#define POST_ROM_POSTUNCOMPRESS (0x0DE) + + +#define P80_CHIPSET_INIT (0x0E0) /* chipset.asm*/ +#define POST_PreChipsetInit (0x0E1) /* geode.asm*/ +#define POST_LateChipsetInit (0x0E2) /* geode.asm*/ +#define POST_NORTHB_INIT (0x0E8) /* northb.asm*/ + + +#define POST_INTR_SEG_JUMP (0x0F0) /* vector.asm*/ + + +/* VR values */ + +#define VRC_INDEX 0xAC1C // Index register +#define VRC_DATA 0xAC1E // Data register +#define VR_UNLOCK 0xFC53 // Virtual register unlock code +#define NO_VR -1 // No virtual registers + +#define VRC_MISCELLANEOUS 0x00 // Miscellaneous Class + #define VSA_VERSION_NUM 0x00 + #define HIGH_MEM_ACCESS 0x01 + #define GET_VSM_INFO 0x02 // Used by INFO + #define GET_BASICS 0x00 + #define GET_EVENT 0x01 + #define GET_STATISTICS 0x02 + #define GET_HISTORY 0x03 + #define GET_HARDWARE 0x04 + #define GET_ERROR 0x05 + #define SET_VSM_TYPE 0x06 + #define SIGNATURE 0x03 + #define VSA2_SIGNATURE 0x56534132 // 'VSA2' returned in EAX + + #define GET_HW_INFO 0x04 + #define VSM_VERSION 0x05 + #define CTRL_ALT_DEL 0x06 + #define MSR_ACCESS 0x07 + #define GET_DESCR_INFO 0x08 + #define PCI_INT_AB 0x09 // GPIO pins for INTA# and INTB# + #define PCI_INT_CD 0x0A // GPIO pins for INTC# and INTD# + #define WATCHDOG 0x0B // Watchdog timer + + #define MAX_MISC WATCHDOG + + +// NOTE: Do not change the order of the following registers: +#define VRC_AUDIO 0x01 // XpressAudio Class + #define AUDIO_VERSION 0x00 + #define PM_STATE 0x01 + #define SB_16_IO_BASE 0x02 + #define MIDI_BASE 0x03 + #define CPU_USAGE 0x04 + #define CODEC_TYPE 0x05 + #define STATE_INDEX 0x06 + #define STATE_DATA 0x07 + #define AUDIO_IRQ 0x08 // For use by native audio drivers + #define STATUS_PTR 0x09 // For use by native audio drivers + #define MAX_AUDIO STATUS_PTR + +#define VRC_VG 0x02 // SoftVG Class +#define VRC_VGA 0x02 // SoftVGA Class + #define VG_MEM_SIZE 0x00 // bits 7:0 - 512K unit size, bit 8 controller priority + #define VG_CONFIG 0x00 // Main configuration register + #define VG_CFG_BYPASS 0x0001 // DOTPLL bypass bit + #define VG_MEM_MASK 0x00FE // Memory size mask bits, 2MB increment + #define VG_CFG_DSMASK 0x0700 // Active display mask bits + #define VG_CFG_DSCRT 0x0000 // Active display is CRT + #define VG_CFG_DSPAN 0x0100 // Active display is panel + #define VG_CFG_DSTV 0x0200 // Active display is TV + #define VG_CFG_DSSIM 0x0400 // Simultaneous CRT + #define VG_CFG_PRIORITY 0x0800 // Controller priority bit + #define VG_CFG_MONO 0x1000 // External monochrome card support bit + #define VG_CFG_DRIVER 0x2000 // Driver active bit + #define VG_CRTC_DIAG 0x8000 // Enable CRTC emulation + + // Defined for GX3/GX3VG + #define VG_REFRESH 0x01 // Mode refresh, a mode switch without changing modes + #define VG_FRSH_REF_MASK 0xE000 // Refresh rate mask + #define VG_FRSH_REF_GO 0x1000 // Refresh rate GO bit + // Uses CFP_REF_xxx values from below + #define VG_FRSH_BPP_MASK 0x0E00 // Color depth mask + #define VG_FRSH_BPP_GO 0x0100 // Color depth GO bit + #define FRSH_BPP_8RGB 0x0200 // 8 bits per pixel, RGB + #define FRSH_BPP_16ARGB 0x0400 // 16BPP, ARGB (4:4:4:4) + #define FRSH_BPP_15RGB 0x0600 // 15BPP, RGB (1:5:5:5) + #define FRSH_BPP_16RGB 0x0800 // 16BPP, RGB (5:6:5) + #define FRSH_BPP_24RGB 0x0A00 // 24BPP, RGB (0:8:8:8) + #define FRSH_BPP_32ARGB 0x0C00 // 32BPP, ARGB (8:8:8:8) + #define VG_CFG_DPMS 0x00C0 // DPMS mask bits + #define VG_CFG_DPMS_H 0x0040 // HSYNC mask bit + #define VG_CFG_DPMS_V 0x0080 // VSYNC mask bit + #define VG_VESA_SV_RST 0x0020 // VESA Save/Restore state flag + #define VG_VESA_RST 0x0000 // VESA Restore state + #define VG_VESA_SV 0x0020 // VESA Save state + #define VG_FRSH_MODE 0x0002 // Mode refresh flag + #define VG_FRSH_TIMINGS 0x0001 // Timings only refresh flag + + // Defined for GX2/SoftVG + #define VG_PLL_REF 0x01 // PLL reference frequency selection register + #define PLL_14MHZ 0x0000 // 14.31818MHz PLL reference frequency (Default) + #define PLL_48MHZ 0x0100 // 48MHz PLL reference frequency + + // Defined for GX1/SoftVGA + #define VGA_MEM_SIZE 0x01 // bits 7:1 - 128K unit size, bit 0 controller enable + + #define VG_FP_TYPE 0x02 // Flat panel type data + // VG_FP_TYPE definitions for GX2/SoftVG + #define FP_TYPE_SSTN 0x0000 // SSTN panel type value + #define FP_TYPE_DSTN 0x0001 // DSTN panel type value + #define FP_TYPE_TFT 0x0002 // TFT panel type value + #define FP_TYPE_LVDS 0x0003 // LVDS panel type value + #define FP_RES_6X4 0x0000 // 640x480 resolution value + #define FP_RES_8X6 0x0008 // 800x600 resolution value + #define FP_RES_10X7 0x0010 // 1024x768 resolution value + #define FP_RES_11X8 0x0018 // 1152x864 resolution value + #define FP_RES_12X10 0x0020 // 1280x1024 resolution value + #define FP_RES_16X12 0x0028 // 1600x1200 resolution value + #define FP_WIDTH_8 0x0000 // 8 bit data bus width + #define FP_WIDTH_9 0x0040 // 9 bit data bus width + #define FP_WIDTH_12 0x0080 // 12 bit data bus width + #define FP_WIDTH_18 0x00C0 // 18 bit data bus width + #define FP_WIDTH_24 0x0100 // 24 bit data bus width + #define FP_WIDTH_16 0x0140 // 16 bit data bus width - 16 bit Mono DSTN only + #define FP_COLOR_COLOR 0x0000 // Color panel + #define FP_COLOR_MONO 0x0200 // Mono Panel + #define FP_PPC_1PPC 0x0000 // One pixel per clock + #define FP_PPC_2PPC 0x0400 // Two pixels per clock + #define FP_H_POL_LGH 0x0000 // HSync at panel, normally low, active high + #define FP_H_POL_HGL 0x0800 // HSync at panel, normally high, active low + #define FP_V_POL_LGH 0x0000 // VSync at panel, normally low, active high + #define FP_V_POL_HGL 0x1000 // VSync at panel, normally high, active low + #define FP_REF_60 0x0000 // 60Hz refresh rate + #define FP_REF_65 0x2000 // 65Hz refresh rate + #define FP_REF_70 0x4000 // 70Hz refresh rate + #define FP_REF_72 0x6000 // 72Hz refresh rate + #define FP_REF_75 0x8000 // 75Hz refresh rate + #define FP_REF_85 0xA000 // 85Hz refresh rate + + // VG_FP_TYPE definitions for GX3/GX3VG + #define FP_TYPE_TYPE 0x0003 // Flat panel type bits mask + #define CFP_TYPE_TFT 0x0000 // TFT panel type value + #define CFP_TYPE_LVDS 0x0001 // LVDS panel type value + #define FP_TYPE_RES 0x0038 // Panel resolution bits mask + #define CFP_RES_3X2 0x0000 // 320x240 resolution value + #define CFP_RES_6X4 0x0008 // 640x480 resolution value + #define CFP_RES_8X6 0x0010 // 800x600 resolution value + #define CFP_RES_10X7 0x0018 // 1024x768 resolution value + #define CFP_RES_11X8 0x0020 // 1152x864 resolution value + #define CFP_RES_12X10 0x0028 // 1280x1024 resolution value + #define CFP_RES_16X12 0x0030 // 1600x1200 resolution value + #define FP_TYPE_BUS 0x00C0 // Data bus width and pixels/clock mask + #define CFP_BUS_1PPC 0x0040 // 9, 12, 18 or 24 bit data bus, 1 pixel per clock + #define CFP_BUS_2PPC 0x0080 // 18 or 24 bit data bus, 2 pixels per clock + #define FP_TYPE_HPOL 0x0800 // HSYNC polarity into the panel + #define CFP_HPOL_HGL 0x0000 // HSync at panel, normally high, active low + #define CFP_HPOL_LGH 0x0800 // HSync at panel, normally low, active high + #define FP_TYPE_VPOL 0x1000 // VSYNC polarity into the panel + #define CFP_VPOL_HGL 0x0000 // VSync at panel, normally high, active low + #define CFP_VPOL_LGH 0x1000 // VSync at panel, normally low, active high + #define FP_TYPE_REF 0xE000 // Panel refresh rate + #define CFP_REF_60 0x0000 // 60Hz refresh rate + #define CFP_REF_70 0x2000 // 70Hz refresh rate + #define CFP_REF_75 0x4000 // 75Hz refresh rate + #define CFP_REF_85 0x6000 // 85Hz refresh rate + #define CFP_REF_100 0x8000 // 100Hz refresh rate + + #define VG_FP_OPTION 0x03 // Flat panel option data + #define FP_OPT_SCLK_NORMAL 0x0000 // SHFTClk not inverted to panel + #define FP_OPT_SCLK_INVERTED 0x0010 // SHFTClk inverted to panel + #define FP_OPT_SCLK_ACT_ACTIVE 0x0000 // SHFTClk active during "active" only + #define FP_OPT_SCLK_ACT_FREE 0x0020 // SHFTClk free-running + #define FP_OPT_LP_ACT_FREE 0x0000 // LP free-running + #define FP_OPT_LP_ACT_ACTIVE 0x0040 // LP active during "active" only + #define FP_OPT_LDE_POL_LGH 0x0000 // LDE/MOD, normally low, active high + #define FP_OPT_LDE_POL_HGL 0x0080 // LDE/MOD, normally high, active low + #define FP_OPT_PWR_DLY_32MS 0x0000 // 32MS delay for each step of pwr seq. + #define FP_OPT_PWR_DLY_128MS 0x0100 // 128MS delay for each step of pwr seq. + + #define VG_TV_CONFIG 0x04 // TV configuration register + #define VG_TV_ENC 0x000F // TV encoder select mask + #define VG_TV_ADV7171 0x0000 // ADV7171 Encoder + #define VG_TV_SAA7127 0x0001 // ADV7171 Encoder + #define VG_TV_ADV7300 0x0002 // ADV7300 Encoder + #define VG_TV_FS454 0x0003 // FS454 Encoder + #define VG_TV_FMT 0x0070 // TV encoder output format mask + #define VG_TV_FMT_SHIFT 0x0004 // Right shift value + #define VG_TV_NTSC 0x0000 // NTSC output format + #define VG_TV_PAL 0x0010 // PAL output format + #define VG_TV_HDTV 0x0020 // HDTV output format + + // The meaning of the VG_TV_RES field is dependent on the selected + // encoder and output format. The translations are: + // ADV7171 - Not Used + // SAA7127 - Not Used + // ADV7300 - HDTV resolutions only + // LO -> 720x480p + // MED -> 1280x720p + // HI -> 1920x1080i + // FS454 - Both SD and HD resolutions + // SD Resolutions - NTSC and PAL + // LO -> 640x480 + // MED -> 800x600 + // HI -> 1024x768 + // HD Resolutions + // LO -> 720x480p + // MED -> 1280x720p + // HI -> 1920x1080i + #define VG_TV_RES 0x0780 // TV resolution select mask + #define VG_TV_RES_SHIFT 0x0007 // Right shift value + #define VG_TV_RES_LO 0x0000 // Low resolution + #define VG_TV_RES_MED 0x0080 // Medium resolution + #define VG_TV_RES_HI 0x0100 // High resolution + #define VG_TV_PASSTHRU 0x0800 // TV passthru mode + + #define VG_TV_SCALE_ADJ 0x05 // Modifies scaling factors for TV resolutions + #define VG_TV_HACT_ADJ 0x00FF // Horizontal active scale adjust value mask + #define VG_TV_VACT_ADJ 0xFF00 // Vertical active scale adjust value mask + + #define VG_DEBUG 0x0F // A debug register + + #define VG_FT_HTOT 0x10 // Fixed timings, horizontal total + #define VG_FT_HACT 0x11 // Fixed timings, horizontal active + #define VG_FT_HBST 0x12 // Fixed timings, horizontal blank start + #define VG_FT_HBND 0x13 // Fixed timings, horizontal blank end + #define VG_FT_HSST 0x14 // Fixed timings, horizontal sync start + #define VG_FT_HSND 0x15 // Fixed timings, horizontal sync end + + #define VG_FT_VTOT 0x16 // Fixed timings, vertical total + #define VG_FT_VACT 0x17 // Fixed timings, vertical active + #define VG_FT_VBST 0x18 // Fixed timings, vertical blank start + #define VG_FT_VBND 0x19 // Fixed timings, vertical blank end + #define VG_FT_VSST 0x1A // Fixed timings, vertical sync start + #define VG_FT_VSND 0x1B // Fixed timings, vertical sync end + + #define VG_START_OFFS_LO 0x20 // Framebuffer start offset bits 15:0 + #define VG_START_OFFS_HI 0x21 // Framebuffer start offset bits 27:16 + + #define VG_FT_VEACT 0x28 // Fixed timings, vertical active + #define VG_FT_VETOT 0x29 // Fixed timings, vertical total + #define VG_FT_VEBST 0x2A // Fixed timings, vertical blank start + #define VG_FT_VEBND 0x2B // Fixed timings, vertical blank end + #define VG_FT_VESST 0x2C // Fixed timings, vertical sync start + #define VG_FT_VESND 0x2D // Fixed timings, vertical sync end + + #define MAX_VGA VGA_MEM_SIZE +// #define MAX_VG VG_FP_OPTION +// #define MAX_VG VG_START_OFFS_HI + #define MAX_VG VG_FT_VESND + +#define VRC_APM 0x03 + #define REPORT_EVENT 0x00 + #define CAPABILITIES 0x01 + #define APM_PRESENT 0x02 + #define MAX_APM APM_PRESENT + + +#define VRC_PM 0x04 // Legacy PM Class + #define POWER_MODE 0x00 + #define POWER_STATE 0x01 + #define DOZE_TIMEOUT 0x02 + #define STANDBY_TIMEOUT 0x03 + #define SUSPEND_TIMEOUT 0x04 + #define PS2_TIMEOUT 0x05 + #define RESUME_ON_RING 0x06 + #define VIDEO_TIMEOUT 0x07 + #define DISK_TIMEOUT 0x08 + #define FLOPPY_TIMEOUT 0x09 + #define SERIAL_TIMEOUT 0x0A + #define PARALLEL_TIMEOUT 0x0B + #define IRQ_WAKEUP_MASK 0x0C +// #define SUSPEND_MODULATION 0x0D + #define SLEEP_PIN 0x0E + #define SLEEP_PIN_ATTR 0x0F +// #define SMI_WAKEUP_MASK 0x10 + #define INACTIVITY_CONTROL 0x11 + #define PM_S1_CLOCKS 0x12 + #define S1_CLOCKS_ON 0x00 + #define S1_CLOCKS_OFF 0x01 +// #define PM_S2_CLOCKS 0x13 +// #define PM_S3_CLOCKS 0x14 +// #define PM_S4_CLOCKS 0x15 +// #define PM_S5_CLOCKS 0x16 + #define PM_S0_LED 0x17 + #define PM_S1_LED 0x18 + #define PM_S2_LED 0x19 + #define PM_S3_LED 0x1A + #define PM_S4_LED 0x1B + #define PM_S5_LED 0x1C + #define PM_LED_GPIO 0x1D + #define PM_IMM_LED 0x1E + #define PM_PWR_LEDS 0x1F + #define MB_LED0 0x01 + #define MB_LED1 0x02 + #define MB_LED2 0x04 + #define MB_LED3 0x08 + #define SIO_LED0 0x10 + #define SIO_LED1 0x20 + #define SIO_LED2 0x40 + #define SIO_LED3 0x80 + #define PM_PME_MASK 0x20 + #define MAX_PM PM_PME_MASK + + +#define VRC_INFRARED 0x05 + #define MAX_INFRARED NO_VR + +#define VRC_TV 0x06 // TV Encoder Class + #define TV_ENCODER_TYPE 0x00 + #define TV_CALLBACK_MASK 0x01 + #define TV_MODE 0x02 + #define TV_POSITION 0x03 + #define TV_BRIGHTNESS 0x04 + #define TV_CONTRAST 0x05 + #define TV_OUTPUT 0x06 + #define TV_TIMING 0x10 // 0x10...0x1D are all timings + #define MAX_TV TV_TIMING + + + +#define VRC_EXTERNAL_AMP 0x07 + #define EAPD_VERSION 0x00 + #define AMP_POWER 0x01 + #define AMP_OFF 0x00 + #define AMP_ON 0x01 + #define AMP_TYPE 0x02 + #define MAX_EXTERNAL_AMP AMP_TYPE + + +#define VRC_ACPI 0x08 + #define ENABLE_ACPI 0x00 // Enable ACPI Mode + #define SCI_IRQ 0x01 // Set the IRQ the SCI is mapped to, sysbios use. + #define ACPINVS_LO 0x02 // new calls to send 32bit physAddress of + #define ACPINVS_HI 0x03 // ACPI NVS region to VSA + #define GLOBAL_LOCK 0x04 // read requests semaphore, write clears + #define ACPI_UNUSED1 0x05 + #define RW_PIRQ 0x06 // read/write PCI IRQ router regs in SB Func0 cfg space + #define SLPB_CLEAR 0x07 // clear sleep button GPIO status's + #define PIRQ_ROUTING 0x08 // read the PCI IRQ routing based on BIOS setup + #define ACPI_UNUSED2 0x09 + #define ACPI_UNUSED3 0x0A + #define PIC_INTERRUPT 0x0B + #define ACPI_PRESENT 0x0C + #define ACPI_GEN_COMMAND 0x0D + #define ACPI_GEN_PARAM1 0x0E + #define ACPI_GEN_PARAM2 0x0F + #define ACPI_GEN_PARAM3 0x10 + #define ACPI_GEN_RETVAL 0x11 + #define MAX_ACPI ACPI_GEN_RETVAL + +#define VRC_ACPI_OEM 0x09 + #define MAX_ACPI_OEM NO_VR + +#define VRC_POWER 0x0A + #define BATTERY_UNITS 0x00 // No. battery units + #define BATTERY_SELECT 0x01 + #define AC_STATUS 0x02 + #define BATTERY_STATUS 0x03 + #define BATTERY_FLAG 0x04 + #define BATTERY_PERCENTAGE 0x05 + #define BATTERY_TIME 0x06 + #define MAX_POWER BATTERY_TIME + + + +#define VRC_OHCI 0x0B // OHCI Class + #define SET_LED 0x00 + #define INIT_OHCI 0x01 + #define MAX_OHCI INIT_OHCI + +#define VRC_KEYBOARD 0x0C // Kbd Controller Class + #define KEYBOARD_PRESENT 0x00 + #define SCANCODE 0x01 + #define MOUSE_PRESENT 0x02 + #define MOUSE_BUTTONS 0x03 + #define MOUSE_XY 0x04 + #define MAX_KEYBOARD MOUSE_XY + + +#define VRC_DDC 0x0D // Video DDC Class + #define VRC_DDC_ENABLE 0x00 // Enable/disable register + #define DDC_DISABLE 0x00 + #define DDC_ENABLE 0x01 + #define VRC_DDC_IO 0x01 // A non-zero value for safety + #define MAX_DDC VRC_DDC_IO + +#define VRC_DEBUGGER 0x0E + #define MAX_DEBUGGER NO_VR + + +#define VRC_STR 0x0F // Virtual Register class + #define RESTORE_ADDR 0x00 // Physical address of MSR restore table + + +#define VRC_COP8 0x10 // Virtual Register class + #define VRC_HIB_ENABLE 0x00 // HIB enable/disable index + #define HIB_ENABLE 0x00 // HIB enable command + #define HIB_DISABLE 0x01 // HIB disable command + #define VRC_HIB_SEND 0x01 // Send packet to COP8 + #define VRC_HIB_READUART 0x02 // Read byte from COP8 UART + #define VRC_HIB_VERSION 0x03 // Read COP8 version + #define VRC_HIB_SERIAL 0x04 // Read 8 byte serial number + #define VRC_HIB_USRBTN 0x05 // Read POST button pressed status + #define MAX_COP8 NO_VR + +#define VRC_OWL 0x11 // Virtual Register class + #define VRC_OWL_DAC 0x00 // DAC (Backlight) Control + #define VRC_OWL_GPIO 0x01 // GPIO Control + #define MAX_OWL VRC_OWL_GPIO + +#define VRC_SYSINFO 0x12 // Virtual Register class + #define VRC_SI_VERSION 0x00 // Sysinfo VSM version + #define VRC_SI_CPU_MHZ 0x01 // CPU speed in MHZ + #define VRC_SI_CHIPSET_BASE_LOW 0x02 + #define VRC_SI_CHIPSET_BASE_HI 0x03 + #define VRC_SI_CHIPSET_ID 0x04 + #define VRC_SI_CHIPSET_REV 0x05 + #define VRC_SI_CPU_ID 0x06 + #define VRC_SI_CPU_REV 0x07 + #define MAX_SYSINFO VRC_SI_CPU_REV + +#define VRC_SUPERIO 0x13 + #define VRC_SIO_CHIPID 0x00 + #define VRC_SIO_NUMLD 0x01 + #define VRC_SIO_FDCEN 0x02 + #define VRC_SIO_FDCIO 0x03 + #define VRC_SIO_FDCIRQ 0x04 + #define VRC_SIO_FDCDMA 0x05 + #define VRC_SIO_FDCCFG1 0x06 + #define VRC_SIO_FDCCFG2 0x07 + #define VRC_SIO_PP1EN 0x08 + #define VRC_SIO_PP1IO 0x09 + #define VRC_SIO_PP1IRQ 0x0A + #define VRC_SIO_PP1DMA 0x0B + #define VRC_SIO_PP1CFG1 0x0C + #define VRC_SIO_SP1EN 0x0D + #define VRC_SIO_SP1IO 0x0E + #define VRC_SIO_SP1IRQ 0x0F + #define VRC_SIO_SP1CFG1 0x10 + #define VRC_SIO_SP2EN 0x11 + #define VRC_SIO_SP2IO 0x12 + #define VRC_SIO_SP2IRQ 0x13 + #define VRC_SIO_SP2CFG1 0x14 + #define VRC_SIO_KBEN 0x15 + #define VRC_SIO_KBIO1 0x16 + #define VRC_SIO_KBIO2 0x17 + #define VRC_SIO_KBIRQ 0x18 + #define VRC_SIO_KBCFG1 0x19 + #define VRC_SIO_MSEN 0x1A + #define VRC_SIO_MSIO 0x1B + #define VRC_SIO_MSIRQ 0x1C + #define VRC_SIO_RTCEN 0x1D + #define VRC_SIO_RTCIO1 0x1E + #define VRC_SIO_RTCIO2 0x1F + #define VRC_SIO_RTCIRQ 0x20 + #define VRC_SIO_RTCCFG1 0x21 + #define VRC_SIO_RTCCFG2 0x22 + #define VRC_SIO_RTCCFG3 0x23 + #define VRC_SIO_RTCCFG4 0x24 + #define MAX_SUPERIO VRC_SIO_RTCCFG4 + +#define VRC_CHIPSET 0x14 + #define VRC_CS_PWRBTN 0x00 + #define VRC_CS_UART1 0x01 + #define VRC_CS_UART2 0x02 + #define MAX_CHIPSET VRC_CS_UART2 + +#define VRC_THERMAL 0x15 + #define VRC_THERMAL_CURR_RTEMP 0x00 // read only + #define VRC_THERMAL_CURR_LTEMP 0x01 // read only + #define VRC_THERMAL_FAN 0x02 + #define VRC_THERMAL_LOW_THRESHOLD 0x03 + #define VRC_THERMAL_HIGH_THRESHOLD 0x04 + #define VRC_THERMAL_INDEX 0x05 + #define VRC_THERMAL_DATA 0x06 + #define VRC_THERMAL_SMB_ADDRESS 0x07 + #define VRC_THERMAL_SMB_INDEX 0x08 + #define VRC_THERMAL_SMB_DATA 0x09 + #define MAX_THERMAL VRC_THERMAL_SMB_DATA + +#define MAX_VR_CLASS VRC_THERMAL + +#ifndef __ASSEMBLER__ + +/* + * Write to a Virtual Register + */ +static inline void vrWrite(u16 wClassIndex, u16 wData) +{ + outl(((u32) VR_UNLOCK << 16) | wClassIndex, VRC_INDEX); + outw(wData, VRC_DATA); +} + + /* + * Read from a Virtual Register + * Returns a 16-bit word of data + */ +static inline u16 vrRead(u16 wClassIndex) +{ + u16 wData; + outl(((u32) VR_UNLOCK << 16) | wClassIndex, VRC_INDEX); + wData = inw(VRC_DATA); + return wData; +} + +/* support functions */ +u32 geode_link_speed(void); +void geodelx_msr_init(void); +void pll_reset(int manualconf, u32 pll_hi, u32 pll_lo); +void cpu_reg_init(int debug_clock_disable, u8 dimm0, u8 dimm1); +void system_preinit(void); +void msr_init(void); #endif + +#endif