[coreboot] New patch to review for coreboot: bc43178 Extend xcompile support for strange names

[Ronald G. Minnich]

Ronald G. Minnich ([e-mail]) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/1953

-gerrit

commit bc431789e24c8b1b81c07267ca1757373417d5b8
Author: Ronald G. Minnich 
Date:   Fri Nov 30 08:32:36 2012 -0800

Extend xcompile support for strange names

Some compilers report littlearm instead of arm. But the compiler names
    itself arm. Recognize this strange convention and do the right thing.
    Note we assume "littlearm" and "arm" are the same -- a safe assumption.
    If we can find the person who runs ARM in big-endian mode someday,
    we can ask them why.

Change-Id: I39cb74b8c7ebf2e560c1f76efa0e2d28cc017d5c
    Signed-off-by: Ronald G. Minnich 
---
 util/xcompile/xcompile | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/util/xcompile/xcompile b/util/xcompile/xcompile
index cc01631..32b877e 100644
--- a/util/xcompile/xcompile
+++ b/util/xcompile/xcompile
@@ -51,6 +51,7 @@ testas() {
    local use_dash_twidth="$4"
    local obj_file="$TMPFILE.o"
    local full_arch="elf$twidth-$arch"
+	local little_full_arch="elf$twidth-little$arch"

rm -f "$obj_file"
    [ -n "$use_dash_twidth" ] && use_dash_twidth="--$twidth"
@@ -60,7 +61,9 @@ testas() {
    # Check output content type.
    local obj_type="$(${gccprefixes}objdump -p $obj_file)"
    local obj_arch="$(expr "$obj_type" : '.*format (.[a-z0-9-]*)')"
-	[ "$obj_arch" = "$full_arch" ] || return 1
+	[ "$obj_arch" = "$full_arch" ] || \
+	[ "$obj_arch" = "$little_full_arch" ] || \
+		 return 1

# Architecture matched.
    GCCPREFIX="$gccprefixes"
@@ -111,9 +114,9 @@ detect_special_flags() {
    		#	CFLAGS="$CFLAGS -mcpu=cortex-a9"
    		testcc "$CC" "\
 $CFLAGS -ffixed-r8 -msoft-float -marm -mabi=aapcs-linux \
--mno-thumb-interwork -march=armv7 -mno-thumb-interwork" && CFLAGS="\
+-mno-thumb-interwork -march=arm -mno-thumb-interwork" && CFLAGS="\
 $CFLAGS -ffixed-r8 -msoft-float -marm -mabi=aapcs-linux \
--mno-thumb-interwork -march=armv7 -mno-thumb-interwork"
+-mno-thumb-interwork -march=arm -mno-thumb-interwork"
    		;;
    esac
 }
@@ -143,8 +146,8 @@ trap clean_up EXIT
 SUPPORTED_ARCHITECTURE="x86 arm"

# ARM Architecture
-TARCH_arm="littlearm"
-TCLIST_arm="littlearm"
+TARCH_arm="arm"
+TCLIST_arm="arm"
 TWIDTH_arm="32"

# X86 Architecture
@@ -155,6 +158,7 @@ XGCCPATH=${1:-"`pwd`/util/crossgcc/xgcc/bin/"}

# This loops over all supported architectures.
 for architecture in $SUPPORTED_ARCHITECTURE; do
+echo $architecture
    GCCPREFIX="invalid"
    TARCH="$(eval echo $TARCH_$architecture)"
    TCLIST="$(eval echo $TCLIST_$architecture)"
@@ -164,7 +168,7 @@ for architecture in $SUPPORTED_ARCHITECTURE; do

# To override toolchain, define CROSS_COMPILE_$arch or CROSS_COMPILE as
    # environment variable.
-	# Ex: CROSS_COMPILE_arm="armv7a-cros-linux-gnueabi-"
+	# Ex: CROSS_COMPILE_arm="arma-cros-linux-gnueabi-"
    #     CROSS_COMPILE_x86="i686-pc-linux-gnu-"
    search="$(eval echo $CROSS_COMPILE_$architecture 2>/dev/null)"
    search="$search $CROSS_COMPILE"