Check the GPIOs in your schematic. maybe you need to enable something.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ On Thursday, November 8, 2018 2:02 PM, galla rao galla.rao80@gmail.com wrote:
Hi Jose,
Thanks for a quick response
Enabled framebuffer in Config as given in inserted picture and am using uefipayload but not seabios
[image.png]
To add more to this
MinnowMax + VGA -> Display is seen BayleyBay + VGA -> Display is not seen
Does the FSP-master\FSP-master\BayTrailFspBinPkg\Vbios\vga.dat needs any change?
Do you think in the hardware the DDI0, DDI1 pins and clk/data can have an impact and needs to be measured
Regards Ranga
On Thu, Nov 8, 2018 at 10:16 AM Jose Trujillo ce.autom@protonmail.com wrote:
Hello Ranga:
If you are using tianocore as payload you should choose vesa framebuffer option and text mode in seabios JT
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ On Thursday, November 8, 2018 1:08 PM, galla rao galla.rao80@gmail.com wrote:
Hi All,
Am facing Gfx Enablement failure, i don't see any Video output on my screen
Config file has below settings
CONFIG_VGA_BIOS_ID="8086,0f31" CONFIG_DRIVERS_PS2_KEYBOARD is not set CONFIG_ONBOARD_VGA_IS_PRIMARY=y CONFIG_VGA_BIOS=y CONFIG_UDELAY_IO is not set CONFIG_DCACHE_RAM_BASE=0xfef00000 CONFIG_DCACHE_RAM_SIZE=0x4000 CONFIG_ACPI_SSDTX_NUM=0 CONFIG_VGA_BIOS_FILE="../intel/cpu/baytrail/vbios/Vga.dat" CONFIG_PCI_64BIT_PREF_MEM is not set
BIOS log specific to Video output onto terminal
------------------------ VLV SSA Platform Policy dump Begin --------------- Graphics Configuration: GttSize : 2 MB IgdDvmt50PreAlloc : 2 PrimaryDisplay : 0 ApertureSize : 2 Turbo Enable : 1
IGD enabled.
dGFXBase = 0x7BE00000
Do i need to configure any setting in \FSP-master\FSP-master\BayTrailFspBinPkg\Vbios\vga.bsf file from BCT?
Please let me know what could be the reason and if anyone has seen such behavior earlier
Best Regards Ranga
