[coreboot] Quick question on vt8237 smbus

[Corey Osgood]

I'm working on vt8237 smbus in v3, and I had a quick question, mostly for
Rudolf Marek and Bari, but feel free to jump in with your 2 cents:

u8 smbus_read_byte(u16 dimm, u8 offset, u16 smbus_io_base)
{
    u8 val;

printk(BIOS_SPEW, "SMBus Read from DIMM %1x at address 0x%4x\n",
                dimm, offset);

smbus_reset(smbus_io_base);

/* Clear host data port. */
    outb(0x00, smbus_io_base + SMBHSTDAT0);
    //SMBUS_DELAY();
    smbus_wait_until_ready(smbus_io_base);

dimm = (dimm << 1) | 1;

outb(dimm, smbus_io_base + SMBXMITADD);

The dimm = (dimm << 1) | 1 is something that came from a via southbridge
porting guide (NOT the one for the vt8237r, I don't have that one). With it,
my spd addresses are 0x50, 0x51, etc, without it, they'd be 0xa1, 0xa3, etc.
Which would be preferred? Do you think we'd ever need a 0xa0 or 0xa2
address?

Thanks,
Corey