Am Montag, 12. November 2007 12:30:33 schrieb Carl-Daniel Hailfinger:
On 08.11.2007 15:05, LinuxBIOS wrote:
#87: flashrom issues on m57sli-s4 -------------------------+----------------------------------------------- --- Reporter: ward | Owner: hailfinger Type: defect | Status: new Priority: major | Milestone: Component: flashrom | Version: v2 Resolution: | Keywords: Dependencies: | Patchstatus: there is no patch -------------------------+----------------------------------------------- --- Changes (by hailfinger):
- owner: somebody => hailfinger
Comment:
I need superiotool output for a board with parallel flash running under LB. NOW.
AFAICS the flash configuration is totally botched on LB with floating GPIOs, wrong timing etc.
I have a patch pending which will solve the flashing problem on all M57SLI boards, but I refuse to send it to the list before I have superiotool output to verify.
Since trac seems to be down, this message goes to the list:
Flashing parallel flash is fixed in r2955.
To be able to autodetect presence of serial flash, I'd like full superiotool output for
- board with parallel flash
- board with serial flash
here is the output form superiotool for a board with serial flash. flashrom under lb fails on detecting the SPI part. (sry, but i don't know the detailed error message any more.)
both running LinuxBIOS r2955 or later. I hope to find a bit which differs in superio configuration that can be used to select the right code path for enabling SPI flash (decode and flash functionality).
Regards, Carl-Daniel
regards, harald