6 Mar
2008
6 Mar
'08
12:33 a.m.
On 06.03.2008 01:20, Carl-Daniel Hailfinger wrote:
Move default mainboard vendor/subsystem from Kconfig to dts.
Signed-off-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net
And attached for Ron.
Regards, Carl-Daniel
--
http://www.hailfinger.org/
Index: LinuxBIOSv3-mainboard_subsystem/mainboard/adl/msm800sev/Kconfig
===================================================================
--- LinuxBIOSv3-mainboard_subsystem/mainboard/adl/msm800sev/Kconfig (Revision 632)
+++ LinuxBIOSv3-mainboard_subsystem/mainboard/adl/msm800sev/Kconfig (Arbeitskopie)
@@ -26,19 +26,3 @@
help
This is the name for the Advanced Digital Logic MSM800SEV mainboard.
-config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
- hex
- # TODO: Fix the PCI ID.
- default 0x1022
- depends BOARD_ADL_MSM800SEV
- help
- Mainboard specific PCI subsystem vendor ID.
-
-config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
- hex
- # TODO: Fix the PCI ID.
- default 0x2323
- depends BOARD_ADL_MSM800SEV
- help
- Mainboard specific PCI subsystem vendor ID.
-
Index: LinuxBIOSv3-mainboard_subsystem/mainboard/adl/msm800sev/dts
===================================================================
--- LinuxBIOSv3-mainboard_subsystem/mainboard/adl/msm800sev/dts (Revision 632)
+++ LinuxBIOSv3-mainboard_subsystem/mainboard/adl/msm800sev/dts (Arbeitskopie)
@@ -23,6 +23,8 @@
/{
mainboard-vendor = "Advanced Digital Logic";
mainboard-name = "MSM800SEV";
+ mainboard_pci_subsystem_vendor = "0x1022";
+ mainboard_pci_subsystem_device = "0x2323";
cpus { };
apic@0 {
/config/("northbridge/amd/geodelx/apic");
Index: LinuxBIOSv3-mainboard_subsystem/mainboard/amd/norwich/Kconfig
===================================================================
--- LinuxBIOSv3-mainboard_subsystem/mainboard/amd/norwich/Kconfig (Revision 632)
+++ LinuxBIOSv3-mainboard_subsystem/mainboard/amd/norwich/Kconfig (Arbeitskopie)
@@ -26,19 +26,3 @@
help
This is the default mainboard name.
-config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
- hex
- # TODO: Fix PCI ID.
- default 0x1022
- depends BOARD_AMD_NORWICH
- help
- Mainboard specific PCI subsystem vendor ID.
-
-config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
- hex
- # TODO: Fix PCI ID.
- default 0x2323
- depends BOARD_AMD_NORWICH
- help
- Mainboard specific PCI subsystem device ID.
-
Index: LinuxBIOSv3-mainboard_subsystem/mainboard/amd/norwich/dts
===================================================================
--- LinuxBIOSv3-mainboard_subsystem/mainboard/amd/norwich/dts (Revision 632)
+++ LinuxBIOSv3-mainboard_subsystem/mainboard/amd/norwich/dts (Arbeitskopie)
@@ -21,6 +21,8 @@
/{
mainboard-vendor = "AMD";
mainboard-name = "NORWICH";
+ mainboard_pci_subsystem_vendor = "0x1022";
+ mainboard_pci_subsystem_device = "0x2323";
cpus { };
apic@0 {
/config/("northbridge/amd/geodelx/apic");
Index: LinuxBIOSv3-mainboard_subsystem/mainboard/artecgroup/dbe61/Kconfig
===================================================================
--- LinuxBIOSv3-mainboard_subsystem/mainboard/artecgroup/dbe61/Kconfig (Revision 632)
+++ LinuxBIOSv3-mainboard_subsystem/mainboard/artecgroup/dbe61/Kconfig (Arbeitskopie)
@@ -26,19 +26,3 @@
help
This is the default mainboard name.
-config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
- hex
- # TODO: Fix PCI ID.
- default 0x1022
- depends BOARD_ARTECGROUP_DBE61
- help
- Mainboard specific PCI subsystem vendor ID.
-
-config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
- hex
- # TODO: Fix PCI ID.
- default 0x2323
- depends BOARD_ARTECGROUP_DBE61
- help
- Mainboard specific PCI subsystem device ID.
-
Index: LinuxBIOSv3-mainboard_subsystem/mainboard/artecgroup/dbe61/dts
===================================================================
--- LinuxBIOSv3-mainboard_subsystem/mainboard/artecgroup/dbe61/dts (Revision 632)
+++ LinuxBIOSv3-mainboard_subsystem/mainboard/artecgroup/dbe61/dts (Arbeitskopie)
@@ -75,6 +75,8 @@
/{
mainboard-vendor = "Artec Group";
mainboard-name = "DBE61";
+ mainboard_pci_subsystem_vendor = "0x1022";
+ mainboard_pci_subsystem_device = "0x2323";
cpus { };
apic@0 {
/config/("northbridge/amd/geodelx/apic");
Index: LinuxBIOSv3-mainboard_subsystem/mainboard/emulation/qemu-x86/Kconfig
===================================================================
--- LinuxBIOSv3-mainboard_subsystem/mainboard/emulation/qemu-x86/Kconfig (Revision 632)
+++ LinuxBIOSv3-mainboard_subsystem/mainboard/emulation/qemu-x86/Kconfig (Arbeitskopie)
@@ -27,17 +27,3 @@
help
This is the default mainboard name.
-config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
- hex
- default 0x15ad
- depends BOARD_EMULATION_QEMU_X86
- help
- Mainboard specific PCI subsystem vendor ID.
-
-config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
- hex
- default 0x1976
- depends BOARD_EMULATION_QEMU_X86
- help
- Mainboard specific PCI subsystem device ID.
-
Index: LinuxBIOSv3-mainboard_subsystem/mainboard/emulation/qemu-x86/dts
===================================================================
--- LinuxBIOSv3-mainboard_subsystem/mainboard/emulation/qemu-x86/dts (Revision 632)
+++ LinuxBIOSv3-mainboard_subsystem/mainboard/emulation/qemu-x86/dts (Arbeitskopie)
@@ -21,6 +21,8 @@
/{
mainboard-vendor = "Emulation";
mainboard-name = "QEMU x86";
+ mainboard_pci_subsystem_vendor = "0x15ad";
+ mainboard_pci_subsystem_device = "0x1976";
device_operations = "qemuvga_pci_ops_dev";
cpus {};
domain@0 {
Index: LinuxBIOSv3-mainboard_subsystem/device/pci_device.c
===================================================================
--- LinuxBIOSv3-mainboard_subsystem/device/pci_device.c (Revision 632)
+++ LinuxBIOSv3-mainboard_subsystem/device/pci_device.c (Arbeitskopie)
@@ -50,6 +50,7 @@
#if CONFIG_CARDBUS_PLUGIN_SUPPORT == 1
#include <device/cardbus.h>
#endif
+#include <statictree.h>
u8 pci_moving_config8(struct device *dev, unsigned int reg)
{
@@ -627,19 +628,17 @@
/* Set the subsystem vendor and device ID for mainboard devices. */
ops = ops_pci(dev);
-#if defined(CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID) && \
- defined(CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID)
- if (dev->on_mainboard && ops && ops->set_subsystem) {
+ if (mainboard_pci_subsystem_set && dev->on_mainboard && ops &&
+ ops->set_subsystem) {
printk(BIOS_DEBUG,
"%s: Setting subsystem VID/DID to %02x/%02x\n",
- dev_path(dev), CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID,
- CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID);
+ dev_path(dev), mainboard_pci_subsystem_vendor,
+ mainboard_pci_subsystem_device);
- ops->set_subsystem(dev,
- CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID,
- CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID);
+ ops->set_subsystem(dev, mainboard_pci_subsystem_vendor,
+ mainboard_pci_subsystem_device);
}
-#endif
+
command = pci_read_config16(dev, PCI_COMMAND);
command |= dev->command;
command |= (PCI_COMMAND_PARITY + PCI_COMMAND_SERR); // Error check.
Index: LinuxBIOSv3-mainboard_subsystem/util/dtc/flattree.c
===================================================================
--- LinuxBIOSv3-mainboard_subsystem/util/dtc/flattree.c (Revision 632)
+++ LinuxBIOSv3-mainboard_subsystem/util/dtc/flattree.c (Arbeitskopie)
@@ -1304,7 +1304,7 @@
extern char *code;
struct node *next;
extern struct node *first_node;
- int found_mainboard_vendor = 0, found_mainboard_partnumber = 0;
+ int found_mainboard_vendor = 0, found_mainboard_partnumber = 0, found_mainboard_subsys = 0;
labeltree(bi->dt);
@@ -1337,6 +1337,14 @@
found_mainboard_partnumber = 1;
fprintf(f, "const char *mainboard_part_number = "%s";\n", prop->val.val);
}
+ if (streq(prop->name, "mainboard_pci_subsystem_vendor")){
+ found_mainboard_subsys++;
+ fprintf(f, "const u16 mainboard_pci_subsystem_vendor = %s;\n", prop->val.val);
+ }
+ if (streq(prop->name, "mainboard_pci_subsystem_device")){
+ found_mainboard_subsys++;
+ fprintf(f, "const u16 mainboard_pci_subsystem_device = %s;\n", prop->val.val);
+ }
}
if (! found_mainboard_vendor){
@@ -1349,6 +1357,20 @@
"Please add one."
"(and make sure there is a mainboard-vendor property too");
}
+ switch (found_mainboard_subsys) {
+ case 0:
+ fprintf(f, "const u16 mainboard_pci_subsystem_vendor = 0;\n");
+ fprintf(f, "const u16 mainboard_pci_subsystem_device = 0;\n");
+ fprintf(f, "const char mainboard_pci_subsystem_set = 0;\n");
+ case 1:
+ die("There is only one of mainboard_pci_subsystem_vendor and "
+ "mainboard_pci_subsystem_device properties in the root. "
+ "Please add the other one or remove the existing one.");
+ break;
+ case 2:
+ fprintf(f, "const char mainboard_pci_subsystem_set = 1;\n");
+ break;
+ }
/* emit the code, if any */
@@ -1392,6 +1414,9 @@
/* emit any includes that we need -- TODO: ONLY ONCE PER TYPE*/
fprintf(f, "#include <device/device.h>\n#include <device/pci.h>\n");
fprintf(f, "extern const char *mainboard_vendor, *mainboard_part_number;\n");
+ fprintf(f, "extern const u16 mainboard_pci_subsystem_vendor;\n");
+ fprintf(f, "extern const u16 mainboard_pci_subsystem_device;\n");
+ fprintf(f, "extern const char mainboard_pci_subsystem_set;\n");
flatten_tree_emit_includes(bi->dt, &coreboot_emitter, f, &strbuf, vi);
flatten_tree_emit_structdecls(bi->dt, &coreboot_emitter, f, &strbuf, vi);