Hi all,
Can any one help me in understanding the following parameter used for the configuration of the LinuxBIOS.
biosbase 0xffff0000 rambase 0x00000800 option XIP_ROM_BASE=0xffff0000 option XIP_ROM_SIZE=0x10000 option STACK_SIZE=0x2000 option ZKERNEL_START=0xfff40000 option ZKERNEL_MASK=0x3ed
Also I have one more query, When executing the linuxbios, it is executing the instrcution twice (i.e., I am getting output twice). I have attached the serial console output below. How to get rid of this?
LinuxBIOS-1.0.0 Sat Jan 11 18:18:32 IST 2003 Revision - 4 (four)starting... Ram1 Ram2 Ram3 Ram Enable 1 Ram Enable 2 Ram Enable 3 Ram Enable 4 000001d0Ram Enable 5
Ram Enable 6
Content of CAPPTR 04Content of BCC 06Ram4 Ram5 Ram6 Copying LinuxBIOS to ram. 00000800ffff0f80 ecx value during image copy 00000000Jumping to LinuxBIOS. Calling hardwaremain ...
LinuxBIOS-1.0.0 Sat Jan 11 18:18:32 IST 2003 Revision - 4 (four)starting... Ram1 Ram2 Ram3 Ram Enable 1 Ram Enable 2 Ram Enable 3 Ram Enable 4 000001d0Ram Enable 5
Ram Enable 6
Content of CAPPTR 04Content of BCC 06Ram4 Ram5 Ram6 Copying LinuxBIOS to ram. 00000800ffff0f80 ecx value during image copy 00000000Jumping to LinuxBIOS. Calling hardwaremain ...
Thanks, Siva