Is it possible to run coreoot on a Gigabyte GA-6QPCV-RH with Intel GM45 and ICH9M-E and ITE IT8718F Super I/O ?
http://www.gigabyte.com.tw/Products/Networking/Products_Spec.aspx?ProductID=...
Details:
Processor Supported
* Intel® Celeron M585/M575 series processor * Socket P with 667/800/1066MHz
Chipset Description
* Intel® GM45 * Intel® ICH9M-E
System Memory
* 2 x DDR2 SO-DIMM sockets * Up to 4GB 667/800 memory
System BIOS
* PhoenixBIOS on 8Mb flash ROM
Integrated Super I/O Controller
* ITE IT8718F Super I/O
Integrated SATA Controller
* Intel®ICH9M-E with RAID 0,1 * 4 SATA connectors
Integrated Network
* Intel® 82567LM and 82574L GbE controllers * Supports iAMT function (Only 82567LM)
Expansion Slot
* 1 PCI slots 32-Bit/33MHz * 1 mini card slot (PCI-E x1/ USB 2.0)
Integrated Video Controller
* Intel® GMA 4500AHD 3D Graphic Engine * Shared system memory up to 256MB
On Board Connectors
* 1 x 24bit LVDS connector * 1 x 19V_IN DC power connector * 4 x SATA connectors * 2 x Serial connectors (COM) * 1 x front audio connector * 3 x USB 2.0 connectors for additional 6 ports by cable * 1 x front panel connecctor * 1 x System fan cable connector * 1 x CPU fan cable connector
Rear I/O Connectors
* 1 x SPDIF Out (Optical + Coaxial) * 1 x YPbPr prot (HDTV out ) * 1 x HDMI port * 1 x VGA port * 4 x USB 2.0 ports * 2 x LAN RJ45 ports * 1 HD Audio jacks (Line-out / MIC-in / Line-in/Cen/SURR) can configure 7.1 channel output by utility
Board Dimension
* Mini ITX form factor * 170mmx170mm