Hi YH,
Have you made any progress on this? Not being able to control the fans is the last thing that is stopping us from deploying LinuxBIOS. I'm worried that the fans will wear out because they come on at full speed after boot, and I can't control them under LinuxBIOS (except if I boot the proprietary BIOS once, and then don't unplug the power to the machine before booting in LinuxBIOS).
Any help would be _greatly_ appreciated...
Thanks, Ward.
On Thu, Apr 20, 2006 at 04:59:52PM -0700, Lu, Yinghai wrote:
I have inited the hw sensors in LinuxBIOS for s2881. So you could use lmsensor to check the FAN speed. The config file is on Tyan web.
For the Fan control, there should more some reg setting...to reduce the FAN speed winbond and adm1027...
YH
!DSPAM:444820c0151711016910990!