Eric,
I have added some hardcode to northbridge/amd/amdk8/coherent_ht.c.
Till now, I can not change NodeID from 7 to 1 for the second Node.
Do I need to send the coherent_ht.c to Stefan to check or after I finished the debug?
Regards
Yinghai Lu
-----邮件原件----- 发件人: YhLu 发送时间: 2003年6月20日 14:23 收件人: ebiederman@lnxi.com 抄送: ron minnich; linuxbios@clustermatic.org 主题: 答复: new config language.
Eric,
S2880 is 2P and it is ready. S4880 is 4P and it is on-going.
Regards
Yinghai Lu
-----邮件原件----- 发件人: ebiederman@lnxi.com [mailto:ebiederman@lnxi.com] 发送时间: 2003年6月20日 14:11 收件人: YhLu 抄送: ron minnich; linuxbios@clustermatic.org 主题: Re: new config language.
YhLu YhLu@tyan.com writes:
Eric,
Thanks for the info about ROMCC.
Welcome. Given that we are switching to writing all of the code before memory is initialized knowing how stable the main tool for doing the job is useful. And the list was copied so I don't have to mention it multiple times.
The code about mem init in northbridge/amd/amdk8/coherent_ht.c and northbridge/amd/amdk8/raminit.c had some overlap. On bus 0, dev 0x18 and f
Very peculiar as I don't see that code and the actual coherent HT mapping is just concerned with function 0. The mapping which specifies which resources go where is on function 1.
I will add something at northbridge/amd/amdk8/coherent_ht.c
There are some peculiarities as the code is a first pass at properly factoring it. I think I made a good stab at it but the code still needs to be generalized.
An important thing to not is that when the code is done there should be no board specific hard codes, excpet in code that lives in auto.c
Do you have a 4P case or just 2P?
Eric _______________________________________________ Linuxbios mailing list Linuxbios@clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios