Re: [coreboot] coreboot on ASRock H81M-HDS cannot load a payload

[Tristan Corrick]

Hi Iru,

It looks like the PCI ID of the Xeon E3 DRAM controller is missing. Try
adding `0c08` to `mc_pci_device_ids` in src/northbridge/intel/haswell/
northbridge.c and see if that works.

Kind regards,
Tristan

On Mon, Dec 17, 2018 at 12:14:29PM +0800, Iru Cai wrote:
> Hi,
>
> I'm trying to run coreboot on ASRock H81M-HDS with a Xeon E3 and 8G*2 RAM.
> I chose to use my GRUB payload, but coreboot cannot load it with the
> following error (full log in attachment):
>
> CBFS: 'Master Header Locator' located CBFS at [1a0000:400000)
> CBFS: Locating 'fallback/payload'
> CBFS: Found @ offset 2fb80 size 1929bd
> Checking segment from ROM address 0xffdcfbb8
> Payload being loaded at below 1MiB without region being marked as RAM
> usable.
> Checking segment from ROM address 0xffdcfbd4
> SELF segment doesn't target RAM: 0x00100000, 5203948 bytes
>  0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES
> 000000007f751000-000000007f78efff: CONFIGURATION TABLES
> 000000007f78f000-000000007f7ccfff: RAMSTAGE
> 000000007f7cd000-000000007f7fffff: CONFIGURATION TABLES
>
> Payload not loaded.
>
> If I use SeaBIOS as payload, SeaBIOS can run, but it can't allocate
> resources for SATA, EHCI and XHCI and can't find any boot devices.
>
> What is the problem in it?
>
> Iru
>
> Please do not send me Microsoft Office/Apple iWork documents. Send
> OpenDocument instead! http://fsf.org/campaigns/opendocument/
> coreboot-4.8-2526-gad8478f643-dirty Sun Dec 16 16:50:38 UTC 2018 romstage starting...
> Disabling Watchdog reboot... done.
> SMBus controller enabled.
> Setting up static northbridge registers... done.
> Initializing Graphics...
> Back from haswell_early_initialization()
> CPU id(306c3) ucode:00000024 Intel(R) Xeon(R) CPU E3-1271 v3 @ 3.60GHz
> AES supported, TXT supported, VT supported
> PCH type: H81, device id: 8c5c, rev id 5
> Starting UEFI PEI System Agent
> FMAP: Found "FLASH" version 1.1 at 180000.
> FMAP: base = ffc00000 size = 400000 #areas = 4
> FMAP: area RW_MRC_CACHE found @ 190000 (65536 bytes)
> MRC: no data in 'RW_MRC_CACHE'
> FMAP: area COREBOOT found @ 1a0000 (2490368 bytes)
> CBFS: Locating 'mrc.bin'
> CBFS: Found @ offset 1fffc0 size 2e6e4
> System Agent: Starting up...
> System Agent: Initializing PCH
> install_ppi: overwrite GUID {ed097352-9041-445a-80b6-b29d509e8845}
> install_ppi: overwrite GUID {908c7f8b-5c48-47fb-8357-f5fd4e235276}
> System Agent: Initializing PCH (SMBUS)
> System Agent: Initializing PCH (USB)
> System Agent: Initializing PCH (SA Init)
> System Agent: Initializing PCH (Me UMA)
> System Agent: Initializing Memory
> System Agent: Done.
> Sanity checking heap.
> System Agent Version 1.6.1 Build 2
> memcfg DDR3 clock 1600 MHz
> memcfg channel assignment: A: 0, B  1, C  2
> memcfg channel[0] config (00620020):
>    ECC inactive
>    enhanced interleave mode on
>    rank interleave on
>    DIMMA 8192 MB width x8 or x32 dual rank, selected
>    DIMMB 0 MB width x8 or x32 single rank
> memcfg channel[1] config (00620020):
>    ECC inactive
>    enhanced interleave mode on
>    rank interleave on
>    DIMMA 8192 MB width x8 or x32 dual rank, selected
>    DIMMB 0 MB width x8 or x32 single rank
> ME: FW Partition Table      : OK
> ME: Bringup Loader Failure  : NO
> ME: Firmware Init Complete  : NO
> ME: Manufacturing Mode      : NO
> ME: Boot Options Present    : NO
> ME: Update In Progress      : NO
> ME: Current Working State   : Normal
> ME: Current Operation State : M0 with UMA
> ME: Current Operation Mode  : Normal
> ME: Error Code              : No Error
> ME: Progress Phase          : uKernel Phase
> ME: Power Management Event  : Clean Moff->Mx wake
> ME: Progress Phase State    : Unknown phase: 0x02 sate: 0x00
> CBMEM:
> IMD: root @ 7f7ff000 254 entries.
> IMD: root @ 7f7fec00 62 entries.
> External stage cache:
> IMD: root @ 7fbff000 254 entries.
> IMD: root @ 7fbfec00 62 entries.
> MTRR Range: Start=ffc00000 End=0 (Size 400000)
> MTRR Range: Start=0 End=1000000 (Size 1000000)
> MTRR Range: Start=7f000000 End=80000000 (Size 1000000)
> CBFS: 'Master Header Locator' located CBFS at [1a0000:400000)
> CBFS: Locating 'fallback/postcar'
> CBFS: Found @ offset 28900 size 4364
> Decompressing stage fallback/postcar @ 0x7f7cdfc0 (33808 bytes)
> Loading module at 7f7ce000 with entry 7f7ce000. filesize: 0x4110 memsize: 0x83d0
> Processing 126 relocs. Offset value of 0x7d7ce000
>
> coreboot-4.8-2526-gad8478f643-dirty Sun Dec 16 16:50:38 UTC 2018 postcar starting...
> CBFS: 'Master Header Locator' located CBFS at [1a0000:400000)
> CBFS: Locating 'fallback/ramstage'
> CBFS: Found @ offset 14100 size 13e4a
> Decompressing stage fallback/ramstage @ 0x7f78efc0 (252344 bytes)
> Loading module at 7f78f000 with entry 7f78f000. filesize: 0x29d70 memsize: 0x3d978
> Processing 2823 relocs. Offset value of 0x7e98f000
>
> coreboot-4.8-2526-gad8478f643-dirty Sun Dec 16 16:50:38 UTC 2018 ramstage starting...
> Normal boot.
> BS: BS_PRE_DEVICE times (us): entry 0 run 0 exit 0
> BS: BS_DEV_INIT_CHIPS times (us): entry 0 run 1 exit 0
> Enumerating buses...
> CPU_CLUSTER: 0 enabled
> DOMAIN: 0000 enabled
> PCI: pci_scan_bus for bus 00
> PCI: 00:00.0 [8086/0c08] enabled
> PCI: Static device PCI: 00:01.0 not found, disabling it.
> PCI: Static device PCI: 00:02.0 not found, disabling it.
> PCI: Static device PCI: 00:03.0 not found, disabling it.
> PCI: 00:14.0 [8086/8c31] enabled
> PCI: 00:16.0 [8086/8c3a] enabled
> PCI: 00:16.1: Disabling device
> PCI: 00:16.2: Disabling device
> PCI: 00:16.3: Disabling device
> PCI: 00:19.0: Disabling device
> PCI: 00:1a.0 [8086/8c2d] enabled
> PCI: 00:1b.0 [8086/8c20] enabled
> PCIe Root Port 1 ASPM is disabled
> PCI: 00:1c.0 [8086/8c10] enabled
> PCI: 00:1c.1 [8086/8c12] disabled
> PCI: 00:1c.2 [8086/8c14] disabled
> PCIe Root Port 4 ASPM is disabled
> PCI: 00:1c.3 [8086/8c16] enabled
> PCIe Root Port 5 ASPM is disabled
> PCI: 00:1c.4 [8086/8c18] enabled
> PCIe Root Port 6 ASPM is disabled
> PCI: 00:1c.5 [8086/8c1a] enabled
> PCI: 00:1d.0 [8086/8c26] enabled
> PCI: 00:1f.0 [8086/8c5c] enabled
> PCI: 00:1f.2 [8086/8c02] enabled
> PCI: 00:1f.3 [8086/8c22] enabled
> PCI: 00:1f.5: Disabling device
> PCI: 00:1f.6: Disabling device
> PCI: pci_scan_bus for bus 01
> scan_bus: scanning of bus PCI: 00:1c.0 took 2646 usecs
> PCI: pci_scan_bus for bus 02
> PCI: 02:00.0 [10ec/8168] enabled
> Enabling Common Clock Configuration
> ASPM: Enabled L1
> scan_bus: scanning of bus PCI: 00:1c.3 took 10596 usecs
> PCI: pci_scan_bus for bus 03
> PCI: 03:00.0 [1b21/1142] enabled
> Enabling Common Clock Configuration
> ASPM: Enabled None
> Failed to enable LTR for dev = PCI: 03:00.0
> scan_bus: scanning of bus PCI: 00:1c.4 took 14643 usecs
> PCI: pci_scan_bus for bus 04
> PCI: 04:00.0 [168c/0030] enabled
> Enabling Common Clock Configuration
> ASPM: Enabled None
> Failed to enable LTR for dev = PCI: 04:00.0
> scan_bus: scanning of bus PCI: 00:1c.5 took 14625 usecs
> PNP: 002e.0 disabled
> PNP: 002e.1 enabled
> PNP: 002e.2 enabled
> PNP: 002e.3 enabled
> PNP: 002e.5 enabled
> PNP: 002e.6 disabled
> PNP: 002e.7 disabled
> PNP: 002e.107 disabled
> PNP: 002e.8 disabled
> PNP: 002e.108 disabled
> PNP: 002e.208 disabled
> PNP: 002e.308 disabled
> PNP: 002e.109 disabled
> PNP: 002e.209 disabled
> PNP: 002e.309 disabled
> PNP: 002e.409 disabled
> PNP: 002e.509 disabled
> PNP: 002e.609 disabled
> PNP: 002e.709 disabled
> PNP: 002e.a disabled
> PNP: 002e.b enabled
> PNP: 002e.d disabled
> PNP: 002e.e disabled
> PNP: 002e.f disabled
> PNP: 002e.14 disabled
> PNP: 002e.16 disabled
> PNP: 002e.17 disabled
> scan_bus: scanning of bus PCI: 00:1f.0 took 54169 usecs
> scan_bus: scanning of bus PCI: 00:1f.3 took 2 usecs
> scan_bus: scanning of bus DOMAIN: 0000 took 217465 usecs
> scan_bus: scanning of bus Root Device took 226566 usecs
> done
> FMAP: area RW_MRC_CACHE found @ 190000 (65536 bytes)
> MRC: Checking cached data update for 'RW_MRC_CACHE'.
> Manufacturer: ef
> SF: Detected W25Q32 with sector size 0x1000, total 0x400000
> MRC: no data in 'RW_MRC_CACHE'
> MRC: cache data 'RW_MRC_CACHE' needs update.
> BS: BS_DEV_ENUMERATE times (us): entry 0 run 234019 exit 36682
> Allocating resources...
> Reading resources...
> Done reading resources.
> skipping PNP: 002e.1@f0 fixed resource, size=0!
> Setting resources...
> PCI: 00:14.0 10 <- [0x00feb00000 - 0x00feb0ffff] size 0x00010000 gran 0x10 mem64
> PCI: 00:16.0 10 <- [0x00feb18000 - 0x00feb1800f] size 0x00000010 gran 0x04 mem64
> PCI: 00:1a.0 10 <- [0x00feb15000 - 0x00feb153ff] size 0x00000400 gran 0x0a mem
> PCI: 00:1b.0 10 <- [0x00feb10000 - 0x00feb13fff] size 0x00004000 gran 0x0e mem64
> PCI: 00:1c.0 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 01 io
> PCI: 00:1c.0 24 <- [0x00febfffff - 0x00febffffe] size 0x00000000 gran 0x14 bus 01 prefmem
> PCI: 00:1c.0 20 <- [0x00febfffff - 0x00febffffe] size 0x00000000 gran 0x14 bus 01 mem
> PCI: 00:1c.3 1c <- [0x0000001000 - 0x0000001fff] size 0x00001000 gran 0x0c bus 02 io
> PCI: 00:1c.3 24 <- [0x00fe700000 - 0x00fe7fffff] size 0x00100000 gran 0x14 bus 02 prefmem
> PCI: 00:1c.3 20 <- [0x00fe800000 - 0x00fe8fffff] size 0x00100000 gran 0x14 bus 02 mem
> PCI: 02:00.0 10 <- [0x0000001000 - 0x00000010ff] size 0x00000100 gran 0x08 io
> PCI: 02:00.0 18 <- [0x00fe800000 - 0x00fe800fff] size 0x00001000 gran 0x0c mem64
> PCI: 02:00.0 20 <- [0x00fe700000 - 0x00fe703fff] size 0x00004000 gran 0x0e prefmem64
> PCI: 00:1c.4 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 03 io
> PCI: 00:1c.4 24 <- [0x00febfffff - 0x00febffffe] size 0x00000000 gran 0x14 bus 03 prefmem
> PCI: 00:1c.4 20 <- [0x00fe900000 - 0x00fe9fffff] size 0x00100000 gran 0x14 bus 03 mem
> PCI: 03:00.0 10 <- [0x00fe900000 - 0x00fe907fff] size 0x00008000 gran 0x0f mem64
> PCI: 00:1c.5 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 04 io
> PCI: 00:1c.5 24 <- [0x00febfffff - 0x00febffffe] size 0x00000000 gran 0x14 bus 04 prefmem
> PCI: 00:1c.5 20 <- [0x00fea00000 - 0x00feafffff] size 0x00100000 gran 0x14 bus 04 mem
> PCI: 04:00.0 10 <- [0x00fea00000 - 0x00fea1ffff] size 0x00020000 gran 0x11 mem64
> PCI: 04:00.0 30 <- [0x00fea20000 - 0x00fea2ffff] size 0x00010000 gran 0x10 romem
> PCI: 00:1d.0 10 <- [0x00feb16000 - 0x00feb163ff] size 0x00000400 gran 0x0a mem
> PNP: 002e.1 60 <- [0x0000000378 - 0x000000037f] size 0x00000008 gran 0x03 io
> PNP: 002e.1 70 <- [0x0000000007 - 0x0000000007] size 0x00000001 gran 0x00 irq
> PNP: 002e.1 74 <- [0x0000000004 - 0x0000000004] size 0x00000001 gran 0x00 drq
> PNP: 002e.1 f0 <- [0x000000003c - 0x000000003b] size 0x00000000 gran 0x00 irq
> PNP: 002e.2 60 <- [0x00000003f8 - 0x00000003ff] size 0x00000008 gran 0x03 io
> PNP: 002e.2 70 <- [0x0000000004 - 0x0000000004] size 0x00000001 gran 0x00 irq
> PNP: 002e.3 60 <- [0x00000002f8 - 0x00000002ff] size 0x00000008 gran 0x03 io
> PNP: 002e.3 70 <- [0x0000000003 - 0x0000000003] size 0x00000001 gran 0x00 irq
> PNP: 002e.5 60 <- [0x0000000060 - 0x0000000060] size 0x00000001 gran 0x00 io
> PNP: 002e.5 62 <- [0x0000000064 - 0x0000000064] size 0x00000001 gran 0x00 io
> PNP: 002e.5 70 <- [0x0000000001 - 0x0000000001] size 0x00000001 gran 0x00 irq
> PNP: 002e.5 72 <- [0x000000000c - 0x000000000c] size 0x00000001 gran 0x00 irq
> PNP: 002e.b 60 <- [0x0000000290 - 0x0000000291] size 0x00000002 gran 0x01 io
> PNP: 002e.b 62 <- [0x0000000000 - 0x0000000001] size 0x00000002 gran 0x01 io
> PNP: 002e.b 70 <- [0x0000000000 - 0x0000000000] size 0x00000001 gran 0x00 irq
> PCI: 00:1f.2 10 <- [0x0000002020 - 0x0000002027] size 0x00000008 gran 0x03 io
> PCI: 00:1f.2 14 <- [0x0000002030 - 0x0000002033] size 0x00000004 gran 0x02 io
> PCI: 00:1f.2 18 <- [0x0000002028 - 0x000000202f] size 0x00000008 gran 0x03 io
> PCI: 00:1f.2 1c <- [0x0000002034 - 0x0000002037] size 0x00000004 gran 0x02 io
> PCI: 00:1f.2 20 <- [0x0000002000 - 0x000000201f] size 0x00000020 gran 0x05 io
> PCI: 00:1f.2 24 <- [0x00feb14000 - 0x00feb147ff] size 0x00000800 gran 0x0b mem
> PCI: 00:1f.3 10 <- [0x00feb17000 - 0x00feb170ff] size 0x00000100 gran 0x08 mem64
> Done setting resources.
> Done allocating resources.
> BS: BS_DEV_RESOURCES times (us): entry 0 run 338864 exit 0
> Enabling resources...
> PCI: 00:00.0 subsystem <- 1849/0c00
> PCI: 00:00.0 cmd <- 06
> PCI: 00:14.0 subsystem <- 1849/8c31
> PCI: 00:14.0 cmd <- 102
> PCI: 00:16.0 subsystem <- 1849/8c3a
> PCI: 00:16.0 cmd <- 02
> PCI: 00:1a.0 subsystem <- 1849/8c2d
> PCI: 00:1a.0 cmd <- 102
> PCI: 00:1b.0 subsystem <- 1849/7662
> PCI: 00:1b.0 cmd <- 102
> PCI: 00:1c.0 bridge ctrl <- 0003
> PCI: 00:1c.0 subsystem <- 1849/8c10
> PCI: 00:1c.0 cmd <- 00
> PCI: 00:1c.3 bridge ctrl <- 0003
> PCI: 00:1c.3 subsystem <- 1849/8c16
> PCI: 00:1c.3 cmd <- 07
> PCI: 00:1c.4 bridge ctrl <- 0003
> PCI: 00:1c.4 subsystem <- 1849/8c18
> PCI: 00:1c.4 cmd <- 06
> PCI: 00:1c.5 bridge ctrl <- 0003
> PCI: 00:1c.5 subsystem <- 1849/8c1a
> PCI: 00:1c.5 cmd <- 06
> PCI: 00:1d.0 subsystem <- 1849/8c26
> PCI: 00:1d.0 cmd <- 102
> PCI: 00:1f.0 subsystem <- 1849/8c5c
> PCI: 00:1f.0 cmd <- 107
> PCI: 00:1f.2 subsystem <- 1849/8c02
> PCI: 00:1f.2 cmd <- 103
> PCI: 00:1f.3 subsystem <- 1849/8c22
> PCI: 00:1f.3 cmd <- 103
> PCI: 02:00.0 cmd <- 03
> PCI: 03:00.0 subsystem <- 1849/1042
> PCI: 03:00.0 cmd <- 102
> PCI: 04:00.0 cmd <- 02
> done.
> BS: BS_DEV_ENABLE times (us): entry 0 run 93919 exit 0
> Initializing devices...
> Root Device init ...
> Root Device init finished in 1974 usecs
> CPU_CLUSTER: 0 init ...
> MTRR: Physical address space:
> 0x00000000fe700000 - 0x0000000100000000 size 0x01900000 type 0
> MTRR: Fixed MSR 0x250 0x0000000000000000
> MTRR: Fixed MSR 0x258 0x0000000000000000
> MTRR: Fixed MSR 0x259 0x0000000000000000
> MTRR: Fixed MSR 0x268 0x0000000000000000
> MTRR: Fixed MSR 0x269 0x0000000000000000
> MTRR: Fixed MSR 0x26a 0x0000000000000000
> MTRR: Fixed MSR 0x26b 0x0000000000000000
> MTRR: Fixed MSR 0x26c 0x0000000000000000
> MTRR: Fixed MSR 0x26d 0x0000000000000000
> MTRR: Fixed MSR 0x26e 0x0000000000000000
> MTRR: Fixed MSR 0x26f 0x0000000000000000
> CPU physical address size: 39 bits
> MTRR: default type WB/UC MTRR counts: 3/0.
> MTRR: UC selected as default type.
>
> MTRR check
> Fixed MTRRs   : Enabled
> Variable MTRRs: Enabled
>
> Initializing VR config.
> CPU has 4 cores, 8 threads enabled.
> Setting up SMI for CPU
> Will perform SMM setup.
> CBFS: 'Master Header Locator' located CBFS at [1a0000:400000)
> CBFS: Locating 'cpu_microcode_blob.bin'
> CBFS: Found @ offset 9080 size b000
> microcode: sig=0x306c3 pf=0x2 revision=0x24
> CPU: Intel(R) Xeon(R) CPU E3-1271 v3 @ 3.60GHz.
> Loading module at 00030000 with entry 00030000. filesize: 0x170 memsize: 0x170
> Processing 16 relocs. Offset value of 0x00030000
> Attempting to start 7 APs
> Waiting for 10ms after sending INIT.
> Waiting for 1st SIPI to complete...AP: slot 2 apic_id 1.
> AP: slot 6 apic_id 7.
> AP: slot 1 apic_id 2.
> AP: slot 3 apic_id 3.
> AP: slot 5 apic_id 5.
> AP: slot 7 apic_id 6.
> done.
> AP: slot 4 apic_id 4.
> Waiting for 2nd SIPI to complete...done.
> Loading module at 00038000 with entry 00038000. filesize: 0x1a8 memsize: 0x1a8
> Processing 13 relocs. Offset value of 0x00038000
> SMM Module: stub loaded at 00038000. Will call 7f7a4b5d(00000000)
> Installing SMM handler to 0x7f800000
> Loading module at 7f810000 with entry 7f810419. filesize: 0x1950 memsize: 0x5978
> Processing 58 relocs. Offset value of 0x7f810000
> Loading module at 7f808000 with entry 7f808000. filesize: 0x1a8 memsize: 0x1a8
> Processing 13 relocs. Offset value of 0x7f808000
> SMM Module: placing jmp sequence at 7f807c00 rel16 0x03fd
> SMM Module: placing jmp sequence at 7f807800 rel16 0x07fd
> SMM Module: placing jmp sequence at 7f807400 rel16 0x0bfd
> SMM Module: placing jmp sequence at 7f807000 rel16 0x0ffd
> SMM Module: placing jmp sequence at 7f806c00 rel16 0x13fd
> SMM Module: placing jmp sequence at 7f806800 rel16 0x17fd
> SMM Module: placing jmp sequence at 7f806400 rel16 0x1bfd
> SMM Module: stub loaded at 7f808000. Will call 7f810419(00000000)
> Initializing Southbridge SMI...
> SMI_STS: PM1 
> TMROF New SMBASE 0x7f800000
> In relocation handler: cpu 0
> New SMBASE=0x7f800000 IEDBASE=0x7fc00000
> Writing SMRR. base = 0x7f800006, mask=0xff800800
> Relocation complete.
> New SMBASE 0x7f7ff800
> In relocation handler: cpu 2
> New SMBASE=0x7f7ff800 IEDBASE=0x7fc00000
> Writing SMRR. base = 0x7f800006, mask=0xff800800
> Relocation complete.
> New SMBASE 0x7f7fe800
> In relocation handler: cpu 6
> New SMBASE=0x7f7fe800 IEDBASE=0x7fc00000
> Writing SMRR. base = 0x7f800006, mask=0xff800800
> Relocation complete.
> New SMBASE 0x7f7fec00
> In relocation handler: cpu 5
> New SMBASE=0x7f7fec00 IEDBASE=0x7fc00000
> Writing SMRR. base = 0x7f800006, mask=0xff800800
> Relocation complete.
> New SMBASE 0x7f7ff000
> In relocation handler: cpu 4
> New SMBASE=0x7f7ff000 IEDBASE=0x7fc00000
> Writing SMRR. base = 0x7f800006, mask=0xff800800
> Relocation complete.
> New SMBASE 0x7f7fe400
> In relocation handler: cpu 7
> New SMBASE=0x7f7fe400 IEDBASE=0x7fc00000
> Writing SMRR. base = 0x7f800006, mask=0xff800800
> Relocation complete.
> New SMBASE 0x7f7ff400
> In relocation handler: cpu 3
> New SMBASE=0x7f7ff400 IEDBASE=0x7fc00000
> Writing SMRR. base = 0x7f800006, mask=0xff800800
> Relocation complete.
> New SMBASE 0x7f7ffc00
> In relocation handler: cpu 1
> New SMBASE=0x7f7ffc00 IEDBASE=0x7fc00000
> Writing SMRR. base = 0x7f800006, mask=0xff800800
> Relocation complete.
> Initializing CPU #0
> CPU: vendor Intel device 306c3
> CPU: family 06, model 3c, stepping 03
> Setting up local APIC... apic_id: 0x00 done.
> VMX status: enabled, locked
> haswell: energy policy set to 6
> haswell: frequency set to 3600
> Turbo is available but hidden
> Turbo has been enabled
> CPU #0 initialized
> Initializing CPU #2
> Initializing CPU #1
> CPU: vendor Intel device 306c3
> Initializing CPU #4
> CPU: family 06, model 3c, stepping 03
> CPU: vendor Intel device 306c3
> CPU: vendor Intel device 306c3
> Setting up local APIC...CPU: family 06, model 3c, stepping 03
>  apic_id: 0x01 Initializing CPU #3
> done.
> Setting up local APIC...Initializing CPU #5
> VMX status: enabled, locked
> Initializing CPU #6
> haswell: energy policy set to 6
> Initializing CPU #7
> CPU: vendor Intel device 306c3
> haswell: frequency set to 3600
> CPU: family 06, model 3c, stepping 03
> CPU #2 initialized
>  apic_id: 0x02 CPU: family 06, model 3c, stepping 03
> Setting up local APIC...Setting up local APIC...CPU: vendor Intel device 306c3
> CPU: vendor Intel device 306c3
> done.
> CPU: vendor Intel device 306c3
>  apic_id: 0x04  apic_id: 0x05 CPU: family 06, model 3c, stepping 03
> CPU: family 06, model 3c, stepping 03
> CPU: family 06, model 3c, stepping 03
> Setting up local APIC...Setting up local APIC...Setting up local APIC...done.
>  apic_id: 0x03 VMX status: enabled, locked
> VMX status: enabled, locked
> done.
> haswell: energy policy set to 6
> done.
> haswell: energy policy set to 6
> VMX status: enabled, locked
> haswell: frequency set to 3600
> haswell: frequency set to 3600
> VMX status: enabled, locked
> CPU #5 initialized
>  apic_id: 0x07  apic_id: 0x06 CPU #1 initialized
> done.
> haswell: energy policy set to 6
> VMX status: enabled, locked
> done.
> haswell: energy policy set to 6
> haswell: frequency set to 3600
> haswell: frequency set to 3600
> CPU #4 initialized
> VMX status: enabled, locked
> CPU #6 initialized
> haswell: energy policy set to 6
> haswell: energy policy set to 6
> haswell: frequency set to 3600
> haswell: frequency set to 3600
> CPU #7 initialized
> CPU #3 initialized
> bsp_do_flight_plan done after 484 msecs.
> Enabling SMIs.
> Locking SMM.
> CPU_CLUSTER: 0 init finished in 661544 usecs
> PCI: 00:00.0 init ...
> PCI: 00:00.0 init finished in 2736 usecs
> PCI: 00:14.0 init ...
> IOBP: set 0xe5004001 to 0x000000ce
> PCI: 00:14.0 init finished in 7516 usecs
> PCI: 00:16.0 init ...
> ME: FW Partition Table      : OK
> ME: Bringup Loader Failure  : NO
> ME: Firmware Init Complete  : YES
> ME: Manufacturing Mode      : NO
> ME: Boot Options Present    : NO
> ME: Update In Progress      : NO
> ME: Current Working State   : Normal
> ME: Current Operation State : M0 with UMA
> ME: Current Operation Mode  : Normal
> ME: Error Code              : No Error
> ME: Progress Phase          : Host Communication
> ME: Power Management Event  : Clean Moff->Mx wake
> ME: Progress Phase State    : Host communication established
> ME: BIOS path: Normal
> ME: Extend SHA-256: 53d07b5984ce080dbe27b6128243f8752927e05c4627b43d79c11693df819db5
> ME MBP: Header: items: 8, size dw: 35
> ME: found version 9.0.30.1482
> ME: Wake Event to ME Reset:      0 ms
> ME: ME Reset to Platform Reset:  0 ms
> ME: Platform Reset to CPU Reset: 40 ms
> PCI: 00:16.0 init finished in 86133 usecs
> PCI: 00:1a.0 init ...
> EHCI: Setting up controller.. IOBP: set 0xe5004001 to 0x000000ce
> done.
> PCI: 00:1a.0 init finished in 10345 usecs
> PCI: 00:1b.0 init ...
> Azalia: base = feb10000
> Azalia: codec_mask = 01
> HDA: Initializing codec #0
> HDA: codec viddid: 10ec0662
> HDA: verb not loaded
> PCI: 00:1b.0 init finished in 18831 usecs
> PCI: 00:1c.0 init ...
> Initializing PCH PCIe bridge.
> PCI: 00:1c.0 init finished in 6204 usecs
> PCI: 00:1c.3 init ...
> Initializing PCH PCIe bridge.
> PCI: 00:1c.3 init finished in 6213 usecs
> PCI: 00:1c.4 init ...
> Initializing PCH PCIe bridge.
> PCI: 00:1c.4 init finished in 6272 usecs
> PCI: 00:1c.5 init ...
> Initializing PCH PCIe bridge.
> PCI: 00:1c.5 init finished in 6300 usecs
> PCI: 00:1d.0 init ...
> EHCI: Setting up controller.. IOBP: set 0xe5004001 to 0x000000ce
> done.
> PCI: 00:1d.0 init finished in 10377 usecs
> PCI: 00:1f.0 init ...
> pch: lpc_init
> IOAPIC: Initializing IOAPIC at 0xfec00000
> IOAPIC: Bootstrap Processor Local APIC = 0x00
> IOAPIC: ID = 0x02
> FMAP: area COREBOOT found @ 1a0000 (2490368 bytes)
> CBFS: Locating 'cmos_layout.bin'
> CBFS: Found @ offset 28600 size 29c
> Set power state keep after power failure.
> FMAP: area COREBOOT found @ 1a0000 (2490368 bytes)
> CBFS: Locating 'cmos_layout.bin'
> CBFS: Found @ offset 28600 size 29c
> NMI sources enabled.
> LynxPoint PM init
> RTC: failed = 0x0
> RTC Init
> Disabling ACPI via APMC:
> done.
> PCI: 00:1f.0 init finished in 64310 usecs
> PCI: 00:1f.2 init ...
> SATA: Initializing...
> SATA: Controller in AHCI mode.
> ABAR: feb14000
> PCI: 00:1f.2 init finished in 11793 usecs
> PCI: 00:1f.3 init ...
> PCI: 00:1f.3 init finished in 2930 usecs
> PCI: 02:00.0 init ...
> CBFS: 'Master Header Locator' located CBFS at [1a0000:400000)
> CBFS: Locating 'rt8168-macaddress'
> CBFS: Found @ offset 28440 size 11
> r8168: Resetting NIC...done
> r8168: Programming MAC Address...done
> r8168: Customized LED 0x824
> r8168: read back LED setting as 0x824
> PCI: 02:00.0 init finished in 31916 usecs
> PCI: 03:00.0 init ...
> PCI: 03:00.0 init finished in 2775 usecs
> PCI: 04:00.0 init ...
> PCI: 04:00.0 init finished in 2763 usecs
> PNP: 002e.1 init ...
> PNP: 002e.1 init finished in 2620 usecs
> PNP: 002e.2 init ...
> PNP: 002e.2 init finished in 2620 usecs
> PNP: 002e.3 init ...
> PNP: 002e.3 init finished in 2621 usecs
> PNP: 002e.5 init ...
> PNP: 002e.5 init finished in 2598 usecs
> PNP: 002e.b init ...
> PNP: 002e.b init finished in 2621 usecs
> Devices initialized
> BS: BS_DEV_INIT times (us): entry 7 run 1065844 exit 42
> Finalize devices...
> PCI: 00:1f.0 final
> Devices finalized
> BS: BS_POST_DEVICE times (us): entry 41 run 13140 exit 41
> BS: BS_OS_RESUME_CHECK times (us): entry 41 run 77 exit 42
> CBFS: 'Master Header Locator' located CBFS at [1a0000:400000)
> CBFS: Locating 'fallback/dsdt.aml'
> CBFS: Found @ offset 2ccc0 size 2e49
> CBFS: 'Master Header Locator' located CBFS at [1a0000:400000)
> CBFS: Locating 'fallback/slic'
> CBFS: 'fallback/slic' not found.
> ACPI: Writing ACPI tables at 7f751000.
> ACPI:    * FACS
> ACPI:    * DSDT
> ACPI:    * FADT
> ACPI: added table 1/32, length now 40
> ACPI:     * SSDT
> Generating ACPI PIRQ entries
> ACPI: added table 2/32, length now 44
> ACPI:    * MCFG
> ACPI: added table 3/32, length now 48
> ACPI:    * MADT
> ACPI: added table 4/32, length now 52
> current = 7f754570
> ACPI:    * DMAR
> ACPI: added table 5/32, length now 56
> ACPI:    * HPET
> ACPI: added table 6/32, length now 60
> ACPI:     * SSDT2
> ACPI: added table 7/32, length now 64
> current = 7f7546a0
> ACPI: done.
> ACPI tables: 13984 bytes.
> Writing table forward entry at 0x00000500
> Wrote coreboot table at: 00000500, 0x10 bytes, checksum 3067
> Writing coreboot table at 0x7f775000
> CBFS: 'Master Header Locator' located CBFS at [1a0000:400000)
> CBFS: Locating 'cmos_layout.bin'
> CBFS: Found @ offset 28600 size 29c
>  0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES
> 000000007f751000-000000007f78efff: CONFIGURATION TABLES
> 000000007f78f000-000000007f7ccfff: RAMSTAGE
> 000000007f7cd000-000000007f7fffff: CONFIGURATION TABLES
>
> CBFS: 'Master Header Locator' located CBFS at [1a0000:400000)
> Wrote coreboot table at: 7f775000, 0x564 bytes, checksum 7fe6
> coreboot table: 1404 bytes.
> IMD ROOT    0. 7f7ff000 00001000
> IMD SMALL   1. 7f7fe000 00001000
> CONSOLE     2. 7f7de000 00020000
> TIME STAMP  3. 7f7dd000 00000910
> MRC DATA    4. 7f7dc000 00000fe4
> ROMSTG STCK 5. 7f7d7000 00005000
> AFTER CAR   6. 7f7cd000 0000a000
> RAMSTAGE    7. 7f78e000 0003f000
> ACPI GNVS   8. 7f78d000 00001000
> SMM BACKUP  9. 7f77d000 00010000
> COREBOOT   10. 7f775000 00008000
> ACPI       11. 7f751000 00024000
> IMD small region:
>   IMD ROOT    0. 7f7fec00 00000400
>   MEM INFO    1. 7f7fea40 000001a9
>   ROMSTAGE    2. 7f7fea20 00000004
>   COREBOOTFWD 3. 7f7fe9e0 00000028
> BS: BS_WRITE_TABLES times (us): entry 42 run 302936 exit 42
> CBFS: 'Master Header Locator' located CBFS at [1a0000:400000)
> CBFS: Locating 'fallback/payload'
> CBFS: Found @ offset 2fb80 size 1929bd
> Checking segment from ROM address 0xffdcfbb8
> Payload being loaded at below 1MiB without region being marked as RAM usable.
> Checking segment from ROM address 0xffdcfbd4
> SELF segment doesn't target RAM: 0x00100000, 5203948 bytes
>  0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES
> 000000007f751000-000000007f78efff: CONFIGURATION TABLES
> 000000007f78f000-000000007f7ccfff: RAMSTAGE
> 000000007f7cd000-000000007f7fffff: CONFIGURATION TABLES
>
> Payload not loaded.
>