On Tue, Jun 02, 2009 at 10:39:56AM -0600, Marc Jones wrote:
We added for one of the C2 parts. It should be easy enough to add the other one. You will also need to change Options.lb for the C2 microcode. Shanghai rev DA-C2: "mc_patch_0100009f.h"
Great, I made those changes, and the microcode update happens now. It also stopped complaining about the CPU version. Booting does not get very far anymore though, so I must be doing something wrong:
------------------------------------------------------------------------------ coreboot-2.0.0-r4329M_h8dmr_Fallback Tue Jun 2 13:24:42 EDT 2009 starting...
BSP Family_Model: 00100f42 *sysinfo range: [000cc000,000cdfa0] bsp_apicid = 00 cpu_init_detectedx = 00000000 microcode: equivalent rev id = 0x1062, current patch id = 0x00000000 microcode: patch id to apply = 0x0100009f microcode: updated to patch id = 0x0100009f success
cpuSetAMDMSR done Enter amd_ht_init() AMD_CB_EventNotify() event class: 05 event: 1004 data: 04 00 00 01 AMD_CB_EventNotify() event class: 05 event: 2006 data: 04 00 02 00 Exit amd_ht_init() cpuSetAMDPCI 00 done cpuSetAMDPCI 01 ------------------------------------------------------------------------------
It hangs right there. This started happening when I added
case 0x10042: ret = AMD_RB_C2; break;
to the switch statement in mctGetLogicalCPUID (northbridge/amd/amdfam10/raminit_amdmct.c), telling coreboot about this CPU version.
If I remove that part again, the system reboots endlessly (this is with the microcode update now working, and the change in Options.lb that you suggested):
http://ward.vandewege.net/coreboot/h8dmr/fam10/h8dmr-j.cap
Thoughts?
Thanks, Ward.