#144: TYAN S7012 support --------------------------------------------------------+------------------- Reporter: john@… | Owner: somebody Type: defect | Status: new Priority: major | Milestone: Component: flashrom | Version: v2 Keywords: TYAN S7012 Intel ICH10R SST SST25VF032B | Dependencies: Patchstatus: there is no patch | --------------------------------------------------------+------------------- I'm unable to flash a system that runs on a TYAN S7012 motherboard.
# flashrom -w bios.bin flashrom v0.9.0-r659 No coreboot table found. Found chipset "Intel ICH10R", enabling flash write... OK. This chipset supports the following protocols: LPC,FWH,SPI. Calibrating delay loop... OK. Found chip "SST SST25VF032B" (4096 KB, SPI) at physical address 0xffc00000. Flash image seems to be a legacy BIOS. Disabling checks. Writing flash chip... COMPLETE. Verifying flash... VERIFY FAILED at 0x00002000! Expected=0x00, Read=0xff
Running it with verbose the following error messages are printed out (repeating).
Writing flash chip... Invalid OPCODE 0x06 due to SPI master limitation, ignoring and hoping it will be run as PREOP Transaction error! run OPCODE 0x02 failed spi_byte_program failed during command execution Invalid OPCODE 0x06 due to SPI master limitation, ignoring and hoping it will be run as PREOP Transaction error! run OPCODE 0x02 failed spi_byte_program failed during command execution Invalid OPCODE 0x06
CONFIG_STRICT_DEVMEM is not set in my kernel.
Anything I should try out?