Hi!
I'm trying to get coreboot v2 running on my Asus M2A-VM. It is very similar to the AMD DBM690T. It has a 690G/SB600 chipset and an IT8716F SuperIO.
My codebase is a slightly modified amd/dbm690t target. I only changed the CPU socket to AM2.
coreboot-2.0.0.0-failover Do 11. Dez 01:16:13 CET 2008 starting... bsp_apicid=0x0 core0 started: SBLink=00 NC node|link=00 rs690_early_setup() get_cpu_rev EAX=0x50ff2. CPU Rev is K8_G0. NB Revision is A12. rs690_ht_init k8_ht_freq=0. k8_optimization() rs690_por_init sb600_early_setup() sb600_devices_por_init() sb600_devices_por_init(): SMBus Device, BDF:0-20-0 SMBus controller enabled, sb revision is 0x13 sb600_devices_por_init(): IDE Device, BDF:0-20-1 sb600_devices_por_init(): LPC Device, BDF:0-20-3 sb600_devices_por_init(): P2P Bridge, BDF:0-20-4 sb600_devices_por_init(): SATA Device, BDF:0-18-0 sb600_pmio_por_init() begin msr fid, vid: hi=0x310a1212, lo=0xa0a0202 Current fid_cur: 0x2, fid_max: 0xa Requested fid_new: 0xa FidVid table step fidvid: 0xa end msr fid, vid: hi=0x310a120a, lo=0xa0a020a needs_reset=0x1 ht reset -
It hangs after that soft reset. No POST code, nothing else.
Any insights are appreciated.
Processor info follows: hilbert:~ # cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 95 model name : AMD Athlon(tm) 64 Processor 3000+ stepping : 2 cpu MHz : 1800.000 cache size : 512 KB fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow rep_good pni cx16 lahf_lm svm extapic cr8_legacy bogomips : 3602.72 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp tm stc
Regards, Carl-Daniel