Re: [coreboot] unknown board - via chipset

[Antoine Martin]

jtd wrote:
> > On Thursday 10 April 2008 09:53 pm, Antoine Martin wrote:
> > / Hi,
>
> />/
> />/ I've got this board I would like to get coreboot flashed on:
> />/ *eBox-3850
> />/ **http://www.icoptech.com/ebox-pc/*
> />/
> />/ 1) CPU is a via C3 Nemehia
> />/ Northbridge is a VT8623
> />/ Southbridge is a VT82xxxxx?
> />/
> />/ 2) # lspci
> />/ 00:00.0 Host bridge: VIA Technologies, Inc. VT8623 [Apollo CLE266]
> />/ 00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266
> />/ AGP] 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI
> />/ USB 1.1 Controller (rev 80)
> />/ 00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
> />/ 00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
> />/ 00:11.1 IDE interface: VIA Technologies, Inc.
> />/ VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
> />/ 00:11.5 Multimedia audio controller: VIA Technologies, Inc.
> />/ VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
> />/ 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102
> />/ [Rhine-II] (rev 74)
> />/ 01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8623
> />/ [Apollo CLE266] integrated CastleRock graphics (rev 03)
> />/
> />/ 3)  Super I/O: via VT1211
> /
> Almost the same as the idot mobo i am working on without much success 
> :(. Only the network controller is different.

How far did you get?
Does anything initialize at all?
> 00:00.0 Host bridge: VIA Technologies, Inc. VT8623 [Apollo CLE266]
> 00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP]
> 00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 
> RTL-8139/8139C/8139C+ (rev 10)
> 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 
> Controller (rev 80)
> 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 
> Controller (rev 80)
> 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 
> Controller (rev 80)
> 00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
> 00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
> 00:11.1 IDE interface: VIA Technologies, Inc. 
> VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
> 00:11.5 Multimedia audio controller: VIA Technologies, Inc. 
> VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
> 01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8623 
> [Apollo CLE266] integrated CastleRock graphics (rev 03)
>
> Does spd work on the epia / epia-m

Dunno.
I've had some good results with coreboot + epia-m before (can't remember 
anything about spd).

Cheers
Antoine