Hi,
From: Patrick Georgi [mailto:patrick.georgi@coresystems.de] Sent: Thursday, October 08, 2009 2:35 PM To: Schwarz, Konrad Cc: coreboot@coreboot.org Subject: Re: [coreboot] Woriking configuration for AMD SimNow
The amd/serengeti_chedetah_fam10 board builds, but when run
the SimNow
BSD "family10_1p.bsd" ultimately ends in a triple fault. (I configured the ROM device to have 1 MB with a starting address to match). I've included a screen shot of the VGA screen:
It seems you're using revision 4671, I fixed that particular issue (or a _very_ likely candidate) in r4697, so please update to at least that revision.
As you suspected, I was using 4671. I have now upgraded to 4742 through the qa.coreboot.org site; I was not able to get svn https: to work with our proxy server.
Please tell us if that fixes it.
Unfortunately no. The simulation clock freezes after 7.33 (simulated) seconds but does not display a triple fault message. No VGA screen comes up.
Konrad