2012/10/26 Peter Stuge peter@stuge.se
Did you run the VGA BIOS in the coreboot emulator or did you make sure that only SeaBIOS would run it? Note that the default is coreboot, which I think is wrong.
I'm not sure I understand the nuance but yes SeaBIOS was the payload. I
followed the instruction on SeaBIOS page ( http://www.coreboot.org/SeaBIOS#Adding_a_VGA_option_ROM) then I think it's SeaBIOS who managed the VGABIOS. But I didn't know who ran the VGABIOS really (emulator or SeaBIOS). How can I check it ? All my config was default then to answer Patrick, yes my SeaBIOS was built with Kconfig and not externally.
I pass radeon.modeset=0 to access a console and flash my rom to get my old bios back.
OK, so you did have graphics then?
No, only the console worked, the screen froze when xorg started up. I selected a runlevel without xorg to get out of this problem.
Note that the kernel drivers are often unaware that there exists anything other than what the factory BIOS does, so when testing some graphics hardware together with coreboot you have to be prepared for things not working out of the box. If you fix it, maybe it will work out of the box for the next person.
I'll try.
Any idea on how this can append and how can change my MAC ?
Sorry, don't know about that one.
:-( but you agree, it's strange, isn't it ?
Anthoine