Jonathan Sturges wrote:
Hi, I'm making progress getting LB working on a Geode GX1-based winterm. I'm getting very close to creating a new target for this terminal, but for the moment am working with the eaglelion/5bcm target, as it's nearly identical. So I thought I'd try the new CS5530 code from last month, but I'm having IDE troubles. Even with:
register "ide0_enable" = "1" register "ide1_enable" = "1"
...in my Config.lb, my system's Primary IDE gets disabled, and the Secondary enabled.
The 5530 patch looks correct to me, so I don't think that's it. I also double-checked that the CS5530 uses the same bits and register for enabling the IDE controllers as the CS5530A, which of course it does.
Any thoughts on what to check next? I'm eager to try the new code.
thanks, Jonathan
Following up on my own question, I found the problem. There was a misplaced 'end' in the mainboard's Config.lb that was causing the ideX_enable register settings to be out of context.
-Jonathan