-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
This may be a general coreboot limitation at the moment. The compatibility sections for mixed CPUs in the BKDG are more concerned with total power delivery and proper P-state setup than anything else.
If I recall correctly, coreboot assumes both CPUs have the same core count when setting up APICs and such. There are a number of places that would need to be modified to remove this assumption; it's a leftover from the original K8 code and would take some significant work to fix. This also needs to be verified as I am going from memory here from a couple of years ago.
On 04/11/2018 02:12 PM, Elisenda Cuadros wrote:
Thank you for your reply Timothy.
Vendor Bios doesn't print any special message regarding this.
In fact it shows a total of 28 cores (16+12).
I thought mixing CPUs from same families was supported.
Regards,
- Eli
On 11/04/18 20:44, Timothy Pearson wrote:
I don't know if coreboot has support for differing CPUs in the same mainboard; it's not something I can recall testing at any point.
The failure is occurring far before memory initialization, in CAR, in core setup. I'd guess it has something to do with the two CPUs you have installed having different core counts.
Does the vendor BIOS print a message about the core count being limited on one of the CPUs for compatibility reasons?
On 04/11/2018 12:57 PM, Elisenda Cuadros wrote:
Hello,
After testing the board for some weeks I bought another CPU (6276). I installed this into CPU1 slot and a 6238 in CPU2.
I checked that both CPUs are shining and also the memory (Micron MT18JSF25672PDZ-1G4F1DD, populated in A2/C2/E2/G2 slots).
The problem is that Coreboot seems to hang at the beginning. I attach console.log.
I reinstalled all the devices twice, checked the vendor manual, docs in coreboot.org, messages in mailing list, but I don't know what is causing the problem.
Last test I've done is booting with vendor bios, and it boots without problem.
Any ideas?
Thank you for your help.
Regards,
- Eli
- -- Timothy Pearson Raptor Engineering +1 (415) 727-8645 (direct line) +1 (512) 690-0200 (switchboard) https://www.raptorengineering.com