[coreboot] [flashrom] r528 - trunk

Author: ruik
Date: 2009-05-17 21:46:43 +0200 (Sun, 17 May 2009)
New Revision: 528

Added:
   trunk/sata_sii.c
Log:
This patch adds support for BIOS flashing on the all SiliconImage SATA
controllers. It was easy because

1) flashrom has now nice API
2) documentation is public on the web site

Signed-off-by: Rudolf Marek 
Acked-by: Uwe Hermann

Don't forget to add a files. Because I do.

Added: trunk/sata_sii.c
===================================================================
--- trunk/sata_sii.c	                        (rev 0)
+++ trunk/sata_sii.c	2009-05-17 19:46:43 UTC (rev 528)
@@ -0,0 +1,131 @@
+/*
+ * This file is part of the flashrom project.
+ *
+ * Copyright (C) 2009 Rudolf Marek 
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, , 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/* Datasheets can be found on http://www.siliconimage.com. Great thanks! */
+
+#include <stdlib.h>
+#include <string.h>
+#include <fcntl.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <errno.h>
+#include "flash.h"
+
+#define PCI_VENDOR_ID_SII	0x1095
+
+uint8_t *sii_bar;
+uint16_t id;
+
+struct pcidev_status satas_sii[] = {
+	{0x1095, 0x0680, PCI_NT, "Silicon Image", "PCI0680 Ultra ATA-133 Host Controller"},
+	{0x1095, 0x3114, PCI_OK, "Silicon Image", "SiI 3114 [SATALink/SATARaid] Serial ATA Controller"},
+	{0x1095, 0x3124, PCI_NT, "Silicon Image", "SiI 3124 PCI-X Serial ATA Controller"},
+	{0x1095, 0x3132, PCI_OK, "Silicon Image", "SiI 3132 Serial ATA Raid II Controller"},
+	{0x1095, 0x3512, PCI_NT, "Silicon Image", "SiI 3512 [SATALink/SATARaid] Serial ATA Controller"},
+	{},
+};
+
+int satasii_init(void)
+{
+	uint32_t addr;
+	uint16_t reg_offset;
+
+	get_io_perms();
+
+	pcidev_init(PCI_VENDOR_ID_SII, satas_sii);
+
+	id = pcidev_dev->device_id;
+
+	if ((id == 0x3132) || (id == 0x3124)) {
+		/* BAR 0, offset 0x70 */
+		addr = pci_read_long(pcidev_dev, PCI_IO_BASE_ADDRESS) & ~0x07;
+		reg_offset = 0x70;
+	} else {
+		/* BAR 5, offset 0x50 */
+		addr = pci_read_long(pcidev_dev, PCI_IO_BASE_ADDRESS + (5 * 4)) & ~0x07;
+		reg_offset = 0x50;
+	}
+
+	sii_bar = physmap("SATA SIL registers", addr, 0x100);
+	sii_bar += reg_offset;
+
+	/* check if rom cycle are OK */
+	if (!(mmio_readl(sii_bar)) & (1 << 26)) {
+		printf("Warning: Flash seems unconnected\n");
+	}
+
+	return 0;
+}
+
+int satasii_shutdown(void)
+{
+
+	free(pcidev_bdf);
+	pci_cleanup(pacc);
+#if defined(__FreeBSD__) || defined(__DragonFly__)
+	close(io_fd);
+#endif
+	return 0;
+}
+
+void *satasii_map(const char *descr, unsigned long phys_addr, size_t len)
+{
+	return 0;
+}
+
+void satasii_unmap(void *virt_addr, size_t len)
+{
+}
+
+void satasii_chip_writeb(uint8_t val, chipaddr addr)
+{
+
+	uint32_t ctrl_reg, addr_reg;
+
+	while ((ctrl_reg = mmio_readl(sii_bar)) & (1 << 25)) ;
+
+	/* Mask out unused/reserved bits, set writes and start transaction */
+	ctrl_reg &= 0xfcf80000;
+	ctrl_reg |= (1 << 25) | (0 << 24) | ((uint32_t) addr & 0x7ffff);
+
+	addr_reg = (mmio_readl((sii_bar + 4)) & ~0xff) | val;
+	mmio_writel(addr_reg, (sii_bar + 4));
+	mmio_writel(ctrl_reg, sii_bar);
+
+	while (mmio_readl(sii_bar) & (1 << 25)) ;
+
+}
+
+uint8_t satasii_chip_readb(const chipaddr addr)
+{
+	uint32_t ctrl_reg;
+
+	while ((ctrl_reg = mmio_readl(sii_bar)) & (1 << 25)) ;
+
+	/* Mask out unused/reserved bits, set reads and start transaction */
+	ctrl_reg &= 0xfcf80000;
+	ctrl_reg |= (1 << 25) | (1 << 24) | ((uint32_t) addr & 0x7ffff);
+
+	mmio_writel(ctrl_reg, sii_bar);
+
+	while ((mmio_readl(sii_bar)) & (1 << 25)) ;
+
+	return (mmio_readl(sii_bar + 4)) & 0xff;
+}