I can try to help here. But what you wrote here is not enough.
What info is required here, is (significantly) more, then you wrote here. I'll try to make some ad-hoc systematic approach. :-)
Phase 1: [1] What PC/CPU you are using for this purpose (as much detailed info as possible: make. year, mobo, configuration, etc.)? [2] What BIOS (UEFI/Legacy, there are only 4 possible cases): [A] 64bit (implies automatically UEFI); [B] Legacy 16bit; [C] Legacy 32bit; [D] UEFI 32bit! [3] BIOS make, year, vendor, any documentation, etc.
From here, the phase 1 accomplishments is to make USB root hub and external
USB ports to work with BIOS + FreeBSD.
Coreboot + FreeBSD will be the phase 2.
Zoran
On Wed, Dec 6, 2017 at 2:47 AM, Vincenzo Di Salvo < ingegneriaforense@alice.it> wrote:
Hello guys,
during the freebsd installation I receive these messages:
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored) usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR ugen0.2: <Unknown> at usbus0 (disconnected) uhub_reattach_port: could not allocate new device
These message disappear if in the BIOS I disable the parameter: USB 1.1 OHCI Controllers, but so doing I cannot use any USB PORT on my workstation.
QUESTIONS:
Please, can you tell me what this means ?
Do you know if using Coreboot is it possible avoid this problem ?
Thanks very much in advance.
Vincenzo.
-- coreboot mailing list: coreboot@coreboot.org https://mail.coreboot.org/mailman/listinfo/coreboot