Re: [coreboot] Gigabyte M57SLI-S4 PCI-Initialisation Problems

[Harald Gutmann]

On Sunday 08 February 2009 18:31:27 Peter Stuge wrote:
> Hi,
>
> Harald Gutmann wrote:
> > As i discussed this point with Peter in #coreboot it we/i got to
> > the conclusion that the value i need to start reading in coreboot
> > was 3c00.
>
> I didn't properly read the background that the I/O base is set by
> SYSCTRL_REG 0x64 so I gave Harald some bad advice, but he's reading
> out the relevant values as I type. I hope he'll send out an update
> in a bit.

Here are the new results which should be the right once.
original.txt = proprietary bios
coreboot.txt = coreboot bios
> //Peter

Regards,
Harald