Re: buildtarget error

[Richard Smith]

> You should have one per pci slot, as well.. but those should only be
> there if something is in the pci slot.. We really need dynamic table
> creation for that.
>
> But all in all, 1 per device in lspci is about right

I only have one slot (and only if its loaded)  I have many devices
soldered onto the board.

Eventually perhaps I'll break you guys of this "commercial motherboard
only" mentality.
*joke*  *grin*

My question was more along the lines of  a device like the south
bridge has many devices in that so does each device in there count or
just ones that need a PIRQ?