On 1/2/11, Darmawan Salihun darmawan.salihun@gmail.com wrote: Hi guys,
I'm looking for the support code for the IDE controller in CS5536 southbridge. I checked-out Coreboot source code but only saw Flash interface support in there. I saw the IDE controller is switched to Flash interface support with the "DEADBEEF" magic number.
The board I'm working with right now use the primary IDE channel for both HDD connectors and a CF connectors. I need to know how to initialize the chipset correctly for this setup. The CF connector is the primary master and the HDD connector is primary slave.
I've checked with lspci and " cat /proc/ioports" and I found that the legacy I/O ports for IDE controller is working just fine. Also, the I/O ports for IDE bus mastering (SFF-8038i) registers are allocated correctly.
I mean with the current code that I tested the I/O ports allocation is just fine.
Thanks,
Darmawan
-= Human knowledge belongs to the world =-