Hello all,
Stefan Reinauer wrote:
- Leon Woestenberg leonw@mailcan.com [060224 13:25]:
Sure, I do, for both the AMD and ST part.
But I do not have the time to fully cross-reference it against all timing specs though.
That part is uncritical. Make sure the block layout is the same. There are different parts that have a "boot block" in the top (T) or bottom (b) of the address range.
When you test flashing on your system and it works, everything except the block sizes will be ok.
I checked and can confirm that both parts use eight uniform erase blocks of 64kByte each, from the datasheets. These parts have no boot blocks BTW.
With this, I think my patch is OK for inclusion.
Regards, Leon.