Re: [coreboot] assistance with updating my bios

[Corey Osgood]

I don't have any hardware to poke at right now :(

-Corey

On Thu, Oct 30, 2008 at 11:57 AM,  wrote:
> any plans on fixing the issue or using alternative? is there a way i can
> assist?
>
> On Oct 30, 2008 5:47pm, Corey Osgood  wrote:
> > AFAIK, flashrom is broken for most ICHx.
> >
> > -Corey
> >
> > On Thu, Oct 30, 2008 at 9:57 AM, [e-mail]> wrote:
> >
> > here is the output you've requested :
> >
> > Calibrating delay loop... 366M loops per second, 100 myus = 350 us. OK.
> > No coreboot table found.
> > Found chipset "Intel ICH", enabling flash write...
> >
> > BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1
> > OK.
> > Probing for AMD Am29F002(N)BB, 256 KB: probe_jedec: id1 0x25, id2 0x81
> > Probing for AMD Am29F002(N)BT, 256 KB: probe_jedec: id1 0x25, id2 0x81
> >
> > Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0xff, id2 0xff
> > Probing for AMD Am29F040B, 512 KB: probe_29f040b: id1 0x25, id2 0x81
> > Probing for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0x25, id2 0x81
> > Probing for ASD AE49F2008, 256 KB: probe_jedec: id1 0x25, id2 0x81
> >
> > Probing for Atmel AT29C020, 256 KB: probe_jedec: id1 0x25, id2 0x81
> > Probing for Atmel AT29C040A, 512 KB: probe_jedec: id1 0x25, id2 0x81
> > Probing for Atmel AT49F002(N), 256 KB: probe_jedec: id1 0x25, id2 0x81
> > Probing for Atmel AT49F002(N)T, 256 KB: probe_jedec: id1 0x25, id2 0x81
> >
> > Probing for Atmel AT25DF321, 4096 KB: spi_command called, but no SPI
>
> chipset/strapping detected
> > Probing for AMIC A25L40P, 512 KB: 4b ID not supported on this SPI
>
> controller
> > Probing for AMIC A29002B, 256 KB: probe_29f002: id1 0xda, id2 0x32
> >
> > Probing for AMIC A29002T, 256 KB: probe_29f002: id1 0xda, id2 0x32
> > Probing for AMIC A29040B, 512 KB: probe_29f040b: id1 0x25, id2 0x81
> > Probing for AMIC A49LF040A, 512 KB: probe_jedec: id1 0x25, id2 0x81
> > Probing for EMST F49B002UA, 256 KB: probe_jedec: id1 0x25, id2 0x81
> >
> > Probing for EON EN29F002(A)(N)B, 256 KB: probe_jedec: id1 0x25, id2 0x81
> > Probing for EON EN29F002(A)(N)T, 256 KB: probe_jedec: id1 0x25, id2 0x81
> > Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0x25, id2
>
> 0x2d
> > Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x25, id2 0x81
> > Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x25, id2 0x81
> > Probing for Macronix MX25L4005, 512 KB: spi_command called, but no SPI
>
> chipset/strapping detected
> > Probing for Macronix MX25L8005, 1024 KB: spi_command called, but no SPI
>
> chipset/strapping detected
> > Probing for Macronix MX25L1605, 2048 KB: spi_command called, but no SPI
>
> chipset/strapping detected
> > Probing for Macronix MX25L3205, 4096 KB: spi_command called, but no SPI
>
> chipset/strapping detected
> > Probing for Macronix MX29F002, 256 KB: probe_29f002: id1 0xda, id2 0x32
> > Probing for Numonyx M25PE10, 128 KB: spi_command called, but no SPI
>
> chipset/strapping detected
> > Probing for Numonyx M25PE20, 256 KB: spi_command called, but no SPI
>
> chipset/strapping detected
> > Probing for Numonyx M25PE40, 256 KB: spi_command called, but no SPI
>
> chipset/strapping detected
> > Probing for Numonyx M25PE80, 1024 KB: spi_command called, but no SPI
>
> chipset/strapping detected
> > Probing for Numonyx M25PE16, 2048 KB: spi_command called, but no SPI
>
> chipset/strapping detected
> > Probing for PMC Pm25LV010, 128 KB: spi_command called, but no SPI
>
> chipset/strapping detected
> > Probing for PMC Pm25LV016B, 2048 KB: spi_command called, but no SPI
>
> chipset/strapping detected
> > Probing for PMC Pm25LV020, 256 KB: spi_command called, but no SPI
>
> chipset/strapping detected
> > Probing for PMC Pm25LV040, 512 KB: spi_command called, but no SPI
>
> chipset/strapping detected
> > Probing for PMC Pm25LV080B, 1024 KB: spi_command called, but no SPI
>
> chipset/strapping detected
> > Probing for PMC Pm25LV512, 64 KB: spi_command called, but no SPI
>
> chipset/strapping detected
> > Probing for PMC Pm49FL002, 256 KB: probe_jedec: id1 0x25, id2 0x81
> > Probing for PMC Pm49FL004, 512 KB: probe_jedec: id1 0x25, id2 0x81
> > Probing for Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0x25, id2 0x81
> > Probing for Spansion S25FL016A, 2048 KB: spi_command called, but no SPI
>
> chipset/strapping detected
> > Probing for SST SST25VF016B, 2048 KB: spi_command called, but no SPI
>
> chipset/strapping detected
> > Probing for SST SST25VF040B, 512 KB: spi_command called, but no SPI
>
> chipset/strapping detected
> > Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0x25, id2 0x81
> >
> > Probing for SST SST29EE010, 128 KB: probe_jedec: id1 0xdb, id2 0x1c, id1
>
> parity violation
> > Probing for SST SST29LE010, 128 KB: probe_jedec: id1 0xdb, id2 0x1c, id1
>
> parity violation
> > Probing for SST SST29EE020A, 256 KB: probe_jedec: id1 0x25, id2 0x81
> >
> > Probing for SST SST29LE020, 256 KB: probe_jedec: id1 0x25, id2 0x81
> > Probing for SST SST39SF010A, 128 KB: probe_jedec: id1 0xdb, id2 0x1c, id1
>
> parity violation
> > Probing for SST SST39SF020A, 256 KB: probe_jedec: id1 0x25, id2 0x81
> >
> > Probing for SST SST39SF040, 512 KB: probe_jedec: id1 0x25, id2 0x81
> > Probing for SST SST39VF512, 64 KB: probe_jedec: id1 0xff, id2 0xff, id1
>
> parity violation
> > Probing for SST SST39VF010, 128 KB: probe_jedec: id1 0xdb, id2 0x1c, id1
>
> parity violation
> > Probing for SST SST39VF020, 256 KB: probe_jedec: id1 0x25, id2 0x81
> > Probing for SST SST39VF040, 512 KB: probe_jedec: id1 0x25, id2 0x81
> > Probing for SST SST49LF002A/B, 256 KB: probe_jedec: id1 0x25, id2 0x81
> > Probing for SST SST49LF003A/B, 384 KB: probe_jedec: id1 0xdb, id2 0x1c,
>
> id1 parity violation
> > Probing for SST SST49LF004A/B, 512 KB: probe_jedec: id1 0x25, id2 0x81
> > Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0x25, id2 0x81
> > Probing for SST SST49LF008A, 1024 KB: probe_jedec: id1 0x25, id2 0x81
> >
> > Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0x25, id2 0x81
> > Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff
> > Probing for SST SST49LF020A, 256 KB: probe_jedec: id1 0x25, id2 0x81
> >
> > Probing for SST SST49LF040, 512 KB: probe_jedec: id1 0x25, id2 0x81
> > Probing for SST SST49LF040B, 512 KB: probe_jedec: id1 0x25, id2 0x81
> > Probing for SST SST49LF080A, 1024 KB: probe_jedec: id1 0x25, id2 0x81
> > Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff
> >
> > Probing for ST M25P05-A, 64 KB: spi_command called, but no SPI
>
> chipset/strapping detected
> > Probing for ST M25P10-A, 128 KB: spi_command called, but no SPI
>
> chipset/strapping detected
> > Probing for ST M25P20, 256 KB: spi_command called, but no SPI
>
> chipset/strapping detected
> > Probing for ST M25P40, 512 KB: spi_command called, but no SPI
>
> chipset/strapping detected
> > Probing for ST M25P40-old, 512 KB: spi_command called, but no SPI
>
> chipset/strapping detected
> > Probing for ST M25P80, 1024 KB: spi_command called, but no SPI
>
> chipset/strapping detected
> > Probing for ST M25P16, 2048 KB: spi_command called, but no SPI
>
> chipset/strapping detected
> > Probing for ST M25P32, 4096 KB: spi_command called, but no SPI
>
> chipset/strapping detected
> > Probing for ST M25P64, 8192 KB: spi_command called, but no SPI
>
> chipset/strapping detected
> > Probing for ST M25P128, 16384 KB: spi_command called, but no SPI
>
> chipset/strapping detected
> > Probing for ST M29F002B, 256 KB: probe_jedec: id1 0x25, id2 0x81
> > Probing for ST M29F002T/NT, 256 KB: probe_jedec: id1 0x25, id2 0x81
> >
> > Probing for ST M29F040B, 512 KB: probe_29f040b: id1 0x25, id2 0x81
> > Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0x25, id2 0x2d
> > Probing for ST M29W010B, 128 KB: probe_jedec: id1 0xdb, id2 0x1c, id1
>
> parity violation
> > Probing for ST M29W040B, 512 KB: probe_jedec: id1 0x25, id2 0x81
> > Probing for ST M50FLW040A, 512 KB: probe_stm50flw0x0x: id1 0xda, id2 0x32
> > Probing for ST M50FLW040B, 512 KB: probe_stm50flw0x0x: id1 0xda, id2 0x32
> >
> > Probing for ST M50FLW080A, 1024 KB: probe_stm50flw0x0x: id1 0xda, id2
>
> 0x32
> > Probing for ST M50FLW080B, 1024 KB: probe_stm50flw0x0x: id1 0xda, id2
>
> 0x32
> > Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff
> >
> > Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x25, id2 0x81
> > Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x25, id2 0x81
> > Probing for ST M50LPW116, 2048 KB: probe_jedec: id1 0xff, id2 0xff, id1
>
> parity violation
> > Probing for SyncMOS S29C31004T, 512 KB: probe_jedec: id1 0x25, id2 0x81
> > Probing for SyncMOS S29C51001T, 128 KB: probe_jedec: id1 0xdb, id2 0x1c,
>
> id1 parity violation
> > Probing for SyncMOS S29C51002T, 256 KB: probe_jedec: id1 0x25, id2 0x81
> >
> > Probing for SyncMOS S29C51004T, 512 KB: probe_jedec: id1 0x25, id2 0x81
> > Probing for Winbond W25x10, 128 KB: spi_command called, but no SPI
>
> chipset/strapping detected
> > Probing for Winbond W25x20, 256 KB: spi_command called, but no SPI
>
> chipset/strapping detected
> > Probing for Winbond W25x40, 512 KB: spi_command called, but no SPI
>
> chipset/strapping detected
> > Probing for Winbond W25x80, 1024 KB: spi_command called, but no SPI
>
> chipset/strapping detected
> > Probing for Winbond W29C011, 128 KB: probe_jedec: id1 0xdb, id2 0x1c, id1
>
> parity violation
> > Probing for Winbond W29C020C, 256 KB: probe_jedec: id1 0x25, id2 0x81
> > Probing for Winbond W29C040P, 512 KB: probe_jedec: id1 0x25, id2 0x81
> > Probing for Winbond W29EE011, 128 KB:
> > ===
> > Probing disabled for Winbond W29EE011 because the probing sequence puts
>
> the
> > AMIC A49LF040A in a funky state.
> > Use 'flashrom -c W29EE011' if you have a board with this chip.
> > ===
> > Probing for Winbond W39V040A, 512 KB: probe_jedec: id1 0x25, id2 0x81
> > Probing for Winbond W39V040B, 512 KB: probe_jedec: id1 0x25, id2 0x81
> >
> > Probing for Winbond W39V040C, 512 KB: probe_w39v040c: id1 0xda, id2 0x32
> > Probing for Winbond W39V040FA, 512 KB: probe_jedec: id1 0x25, id2 0x81
> > Probing for Winbond W39V080A, 1024 KB: probe_jedec: id1 0x25, id2 0x81
> >
> > Probing for Winbond W49F002U, 256 KB: probe_jedec: id1 0x25, id2 0x81
> > Probing for Winbond W49V002A, 256 KB: probe_jedec: id1 0x25, id2 0x81
> > Probing for Winbond W49V002FA, 256 KB: probe_jedec: id1 0x25, id2 0x81
> > Probing for Winbond W39V080FA, 1024 KB: probe_winbond_fwhub: vid 0xda,
>
> did 0x32
> > Probing for Winbond W39V080FA (dual mode), 512 KB: probe_winbond_fwhub:
>
> vid 0xda, did 0x32
> > Probing for EON unknown EON SPI chip, 0 KB: spi_command called, but no
>
> SPI chipset/strapping detected
> > Probing for Macronix unknown Macronix SPI chip, 0 KB: spi_command called,
>
> but no SPI chipset/strapping detected
> > Probing for PMC unknown PMC SPI chip, 0 KB: spi_command called, but no
>
> SPI chipset/strapping detected
> > Probing for SST unknown SST SPI chip, 0 KB: spi_command called, but no
>
> SPI chipset/strapping detected
> > Probing for ST unknown ST SPI chip, 0 KB: spi_command called, but no SPI
>
> chipset/strapping detected
> > No EEPROM/flash device found.
> >
> > If you know which flash chip you have, and if this version of flashrom
> > supports a similar flash chip, you can try to force read your chip. Run:
> > flashrom -f -r -c similar_supported_flash_chip filename
> >
> > Note: flashrom can never write when the flash chip isn't found
>
> automatically.
> > Blessings,
> > Elia Yehuda.
> >
> > On Oct 30, 2008 2:30pm, Carl-Daniel Hailfinger
>
> [e-mail]> wrote:
> > > Hi Elia,
> > >
> > > On 30.10.2008 11:45, Elia Yehuda wrote:
> > > > I'm trying to play with coreboot to flash my bios on my PC, with no
>
> success.
> > > > here are the computer hardware information followed by the commands
>
> I'm
> > > > trying to execute.
> > > >
> > > > cpu:         Socket370 Intel Pentium III Celeron
> > > > northbridge:    Intel 82810E
> > > > southbridge:    Intel 8281AA
> > > > mainboard:    810 R 4.1 with lan
> > > > super i/o:    Winbond W8362F-AW
> > > > bios device:    ST M50FW002
> > > >
> > > > lspci output:
> > > > [...]
> > > >
> > > > $ flashrom -f -r -c M50FW016 mydump
> > > > Calibrating delay loop... OK.
> > > > No coreboot table found.
> > > > Found chipset "Intel ICH", enabling flash write... OK.
> > > > No EEPROM/flash device found.
> > > > Force read (-f -r -c) requested, forcing chip probe success:
> > > > Found chip "ST M50FW016" (2048 KB) at physical address 0xffe00000.
> > > > Force reading flash...done
> > > >
> > >
> > > It is a bad sign if you had to force the chip type for the read
>
> operation.
> > > > $ flashrom -f -w -c M50FW016 mydump
> > > > Calibrating delay loop... OK.
> > > > No coreboot table found.
> > > > Found chipset "Intel ICH", enabling flash write... OK.
> > > > No EEPROM/flash device found.
> > > >
> > >
> > > Force write can't work because the strategy for access is unknown.
> > > > I'd appreciate any assistance as all this flashing stuff is new to
>
> me.
> > > > Basically what i'm trying to accomplish is having my linux system
>
> running as
> > > > the payload, but i'm stuck with even re-writing the same bios-dump
>
> i've just
> > > > read from the bios... I'll post any further information required to
>
> diagnose
> > > > this further.
> > > >
> > >
> > > Can you run
> > >
> > > flashrom -V
> > >
> > > and report the results to this list?
> > >
> > > We may need to change the chipset/board enable sequence for your board.
> > > Regards,
> > >
> > > Carl-Daniel
> > >
> > > http://www.hailfinger.org/
> > >
> >
> > coreboot mailing list: [e-mail]
> >
> > http://www.coreboot.org/mailman/listinfo/coreboot