Sorry, I don't know the specifics on Sandy Bridge, if CAR from the Core 2s would work or not. You can take a look at other chipsets in the coreboot source tree to get an idea of what would be required.
-Corey
On Mon, Mar 28, 2011 at 5:36 AM, sharib khan sharib4444@gmail.com wrote:
Thanks for the response Corey.
It is possible for us to get the boot sequence and other required documents for these processors. Could you highlight what are the necessary changes required in coreboot while integrating a new processor.
Also with my limited understanding of coreboot as of now I am assuming we should be able to use standard linux device drivers to support devices on our board. Is that correct?
Kind Regards, Sharib
On Mon, Mar 28, 2011 at 2:31 PM, Corey Osgood corey.osgood@gmail.com wrote:
Supporting them should be possible, but would require documention from intel that's only available under an RS-NDA.
-Corey
On Mon, Mar 28, 2011 at 4:25 AM, sharib khan sharib4444@gmail.com wrote:
Hi,
I am doing a feasibility study to port coreboot on our new generation data processing boards. We are evaluating on Sandy bridge and Jasper Forest (Intel Processor's). Could someone explain if it is possible to support these processors on coreboot.
If yes, what could be the steps required.
Kind Regards, Sharib
-- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot