On Thu, Aug 14, 2003 at 02:26:01PM +0800, Andrew Ip wrote:
Ron Minnich wrote:
you're going to have to figure out how to make those chips assert pci reset. Once you get it, tell me :-)
I don't have this reset problem.
Interesting. Any suggestions on where I should poke around to help debug this?
As an aside, I found a Winbond w49f002u chip and decided to back up the original EPIA BIOS to it. I had to remove the print statements from the flash_and_burn w49f002u driver, turn off the chip erase, and program it repeatedly before it verified correctly! Apparently that chip is very timing sensitive! Aside from that issue, the Winbond chip works fine on the EPIA.
Thanks,
Jeff