Author: uwe Date: 2007-06-03 22:39:47 +0200 (Sun, 03 Jun 2007) New Revision: 2708
Modified: trunk/LinuxBIOSv2/src/mainboard/tyan/s1846/Config.lb Log: Fix the static device tree of the Tyan S1846. Especially the Super I/O part was incorrect.
Also, add ide0_enable/ide1_enable variables, and enable both the primary and secondary IDE interface per default.
Signed-off-by: Uwe Hermann uwe@hermann-uwe.de Acked-by: Stefan Reinauer stepan@coresystems.de
Modified: trunk/LinuxBIOSv2/src/mainboard/tyan/s1846/Config.lb =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/tyan/s1846/Config.lb 2007-06-03 16:57:27 UTC (rev 2707) +++ trunk/LinuxBIOSv2/src/mainboard/tyan/s1846/Config.lb 2007-06-03 20:39:47 UTC (rev 2708) @@ -125,38 +125,46 @@ dir /pc80 config chip.h
-# TODO. -chip northbridge/intel/i440bx # Northbridge - device pci_domain 0 on - device pci 0.0 on end # Host bridge - device pci 1.0 off end # PCI bridge TODO: AGP bridge? - # device pci 7.0 on end # ISA bridge - chip southbridge/intel/i82371eb # Southbridge - device pci 7.0 on # ISA bridge ??? - chip superio/nsc/pc87309 # Super I/O - device pnp 2e.0 on end # Floppy - device pnp 2e.1 on end # Parallel port - device pnp 2e.2 on end # Com2 - device pnp 2e.3 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.4 on end # Power mgmt. - device pnp 2e.5 on end # Mouse - device pnp 2e.6 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 # ??? - end - end - device pci 7.1 on end # IDE - device pci 7.2 on end # USB - device pci 7.3 on end # ACPI - end - end - end - chip cpu/intel/slot_2 - end +chip northbridge/intel/i440bx # Northbridge + device pci_domain 0 on + device pci 0.0 on end # Host bridge + device pci 1.0 on end # AGP bridge + chip southbridge/intel/i82371eb # Southbridge + device pci 7.0 on # ISA bridge + chip superio/nsc/pc87309 # Super I/O + device pnp 2e.5 on # Keyboard + Mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.b on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.c on # Com2 / IR + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.d on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.f on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + end + end + device pci 7.1 on end # IDE + device pci 7.2 on end # USB + device pci 7.3 on end # ACPI + register "ide0_enable" = "1" + register "ide1_enable" = "1" + end + end + chip cpu/intel/slot_2 # CPU + end end