Re: [coreboot] [PATCH] superiotool: fix wrong IT8718F keyboard value

[Josh]

On Thu, 09 Oct 2008, Uwe Hermann wrote:
> Maybe, maybe not. Page 56 says 0x08, but on page 32 it says 0x00. The
> datasheet contradicts itself here, and we don't know which one is
> actually the correct default. We should probably document this in the
> code, though.
>
> The difference is that KBC clock is either 8 or 12 MHz, which is
> board-dependent, unclear what could be the default for the chip.

Ok, I see.  There was at least one other discrepancy like that in the
datasheets, so I'll at least document them in my it8726f superiotool patch.

Josh