On Thu, 25 Jun 2009 13:45:21 +0200, Arnaud Maye arnaud.maye@4dsp.com wrote:
Hey Gents,
So the 2T timings did the trick, phoooow!
This is fair enough. Actually, our final hardware is not having any DIMMs but the chipsets themselves mounted on the board. So anyway all the timings will need to be found again.
This is enough to allow me going forward with the dev until we get our protos!
As a side note, Intel and their "protection by obscurity". I am fighting for a bit more than one week to obtain an "orange cover" document from Intel :
*RS - Intel(R) EP80579 Integrated Processor Product Line BIOS/Firmware Writer's Guide
*They have asked us to sign a CNDA and now we are waiting to receive a RSNDA to maybe get this document.
I will be laughing if this document does not provide any key information finally.
We will see!
Thanks for all your support guys, I(we)'ve got it working even if the performance will not be as good as in 1T mode.
Good to hear Arnaud. Have fun with Intel.... From everything I have heard it's like beating your head against a brick wall to get anything out of them. Even then they they just give you enough info to skim bye....