I see. Hopefully your BIOS chip is resilient enough, as supplying 5V instead of 3.3 V might have damaged it or reduced its reliability. Even if you got one of the faulty CH341A with 5V instead of 3.3V, it's possible to hardware mod it like https://www.chucknemeth.com/usb-devices/ch341a/3v-ch341a-mod to make it 3.3V. In my opinion RPi is less secure than a simple tool like CH341A - so even if you got the BIOS flashing working with RPi, repeating your success with CH341A is still a worthy goal.
You need to press the ESCape key to open the SeaBIOS boot menu, not DELete.
On Sat, Jan 23, 2021 at 7:56 PM magiccat1--- via coreboot coreboot@coreboot.org wrote:
Hi Mike,
Thank you so much for your help,
I found out why Ch341a did not work. It is outputting 5 V, when I replaced that with 3.3 V from Raspberry pi, everything works. Raspberry pi is a good flashing tool.
Then I have seabios working. I am total new to Seabios, when I put in a USB key and a SATA hard-drive, it always picks SATA hard-drive. When I press delete key, there is no option to move to USB key.
I am not sure how to use seabios to boot with USB storage.
Thanks, _______________________________________________ coreboot mailing list -- coreboot@coreboot.org To unsubscribe send an email to coreboot-leave@coreboot.org