Re: [LinuxBIOS] IBM Netvista n2800

> Message du 19/12/06 à 13h24
> De : "Stefan Reinauer" 
> A : [e-mail]
> Copie à : [e-mail]
> Objet : Re: [LinuxBIOS] IBM Netvista n2800
> [e-mail]  [061219 11:52]:
> > Hi,
> >
> > I have an IBM Netvista n2800, which is originally used as a network
> > client. There is neither floppy driver nor cd-rom in it. Right now it
> > runs Debian 3.1 very well. May I use LinuxBios in this machine?
> >
> > He uses Interl430TX, PIIX4E, Pentunm266MMX, with a SII 64k bios flash.
> > Thanks in advance!
>
> a) Does the machine have a socketed BIOS chip?

What is a socketed BIOS chip? I can only identify there are two ISSI chips like BIOS, they are:
IS61LV6464-6TQ
IS61LV256-12J
> b) Can you send an lspci -vvv ?

0000:00:00.0 Host bridge: Intel Corp. 430TX - 82439TX MTXC (rev 01)
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
    Latency: 32

0000:00:01.0 VGA compatible controller: S3 Inc. Trio 64 3D (rev 01) (prog-if 00 [VGA])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 32 (1000ns min, 63750ns max)
    Interrupt: pin A routed to IRQ 11
    Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=64M]
    Expansion ROM at fe000000 [disabled] [size=64K]
    Capabilities: [44] Power Management version 1
    	Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    	Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:02.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08)
    Subsystem: Intel Corp. EtherExpress PRO/100+ Management Adapter
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64 (2000ns min, 14000ns max), Cache Line Size: 0x08 (32 bytes)
    Interrupt: pin A routed to IRQ 10
    Region 0: Memory at f3eff000 (32-bit, non-prefetchable) [size=4K]
    Region 1: I/O ports at 7c40 [size=64]
    Region 2: Memory at f3f00000 (32-bit, non-prefetchable) [size=1M]
    Expansion ROM at <unassigned> [disabled] [size=1M]
    Capabilities: [dc] Power Management version 2
    	Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
    	Status: D0 PME-Enable- DSel=0 DScale=2 PME-

0000:00:05.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
    Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0

0000:00:05.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master])
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 32
    Region 4: I/O ports at fff0 [size=16]

0000:00:05.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 32
    Interrupt: pin D routed to IRQ 6
    Region 4: I/O ports at ff00 [size=32]

0000:00:05.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
    Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Interrupt: pin ? routed to IRQ 9
>