Am Donnerstag, den 02.04.2009, 19:12 +0200 schrieb samuel:
OK,
I managed booting the firmware... I never worked with serial ports and stuff so this took me a while to grab the idea...
Anyway, you can find the boot.log on http://merlin.ugent.be/~samuel/dl145g3/boot.log
Obviously that boot line is wrong. http://merlin.ugent.be/~samuel/dl145g3/filo_config obviously CONFIG_MENULST_FILE="hda3:/boot/filo/menu.lst" is wrong. My kernel I'd like to boot is hda1:/2.6.28.8_x86-64
Trying to boot this as follows:
kernel hda1:/2.6.28.8_x86_64
results in:
Drive 0 does not exist Error 15: File not found.
I'm a bit stuck I'm afraid, afaik i did patch filo with the patch from mondrian so prolly me config of filo is wrong?
I have never tried it myself. But as far as I know FILO handles config files from GRUB, where is written what options are available for boot. So if you have used GRUB before, you have to point the config to this file.
Thanks,
Paul