2 Feb
2010
2 Feb
'10
8:04 a.m.
Unfortunately, I do not have a single board with the original vendor bios. These nodes were all flashed with LinuxBios a long time ago. I was trying to upgrading them to a newer version so I could use gpxe. Does anyone have this information? Thanks.
--
Hugh Greenberg
On 02/02/2010 01:18 AM, Knut Kujat wrote:
> Hi,
> I used to have the same problems with mptable but because my entrance in
> mptable for my network devices weren't correct so they never got an irq
> assigned. Could you send in a lspci -vvv (with vendor bios) and the
> lines from mptable where you assign irq to your network device(s?)?
>
> Thanks,
> Knut Kujat.
>
>
> Hugh Greenberg escribió:
>
>> They look correct to me, but I don't know exactly what to look for. I
>> checked the irq tables and they were correct. I checked the mptable
>> and tried change things, but nothing helped. Linux ernels>= 2.6.30
>> do not permit my pci devices to work correctly. Kernels older than
>> that seem to work. Attached is the output from coreboot and from Linux.
>>
>>
>
>