Does anyone know whether these work?
----- Forwarded message from Mark-Andres Hohm sachse@gmx.net -----
Date: Wed, 15 Oct 2003 19:48:34 +0200 From: Mark-Andres Hohm sachse@gmx.net To: Stefan Reinauer stepan@suse.de Subject: Re: Epox Boards
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Stefan Reinauer wrote: | * Mark-Andres Hohm sachse@gmx.net [031013 20:59]: | |>-----BEGIN PGP SIGNED MESSAGE----- |>Hash: SHA1 |> |>Have anyone expirience with Epox board and linuxbios? | | | _Which_ Epox board? Can you send lspci -vvv? | | Stefan
here are the lspci from the epox kta3pro this have to work with linux and win
00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 03) ~ Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- ~ Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- ~ Latency: 8 ~ Region 0: Memory at d0000000 (32-bit, prefetchable) [size=32M] ~ Capabilities: [a0] AGP version 2.0 ~ Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2,x4 ~ Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none> ~ Capabilities: [c0] Power Management version 2 ~ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) ~ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] (prog-if 00 [Normal decode]) ~ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- ~ Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- ~ Latency: 0 ~ Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 ~ I/O behind bridge: 0000f000-00000fff ~ Memory behind bridge: d4000000-d5ffffff ~ Prefetchable memory behind bridge: d2000000-d3ffffff ~ BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- ~ Capabilities: [80] Power Management version 2 ~ Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) ~ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40) ~ Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge ~ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- ~ Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- ~ Latency: 0 ~ Capabilities: [c0] Power Management version 2 ~ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) ~ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP]) ~ Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE ~ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- ~ Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- ~ Latency: 32 ~ Region 4: I/O ports at 9000 [size=16] ~ Capabilities: [c0] Power Management version 2 ~ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) ~ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.2 USB Controller: VIA Technologies, Inc. USB (rev 16) (prog-if 00 [UHCI]) ~ Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller ~ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- ~ Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- ~ Latency: 32, cache line size 08 ~ Interrupt: pin D routed to IRQ 11 ~ Region 4: I/O ports at 9400 [size=32] ~ Capabilities: [80] Power Management version 2 ~ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) ~ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40) ~ Subsystem: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] ~ Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- ~ Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- ~ Interrupt: pin ? routed to IRQ 9 ~ Capabilities: [68] Power Management version 2 ~ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) ~ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 50) ~ Subsystem: VIA Technologies, Inc. Onboard Audio on EP7KXA ~ Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- ~ Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- ~ Interrupt: pin C routed to IRQ 5 ~ Region 0: I/O ports at 9c00 [size=256] ~ Region 1: I/O ports at a000 [size=4] ~ Region 2: I/O ports at a400 [size=4] ~ Capabilities: [c0] Power Management version 2 ~ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) ~ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) ~ Subsystem: Allied Telesyn International AT-2500TX/ACPI ~ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- ~ Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- ~ Latency: 32 (8000ns min, 16000ns max) ~ Interrupt: pin A routed to IRQ 10 ~ Region 0: I/O ports at a800 [size=256] ~ Region 1: Memory at d7001000 (32-bit, non-prefetchable) [size=256] ~ Capabilities: [50] Power Management version 1 ~ Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) ~ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.0 SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U ~ Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- ~ Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- ~ Latency: 32 (2000ns min, 2000ns max), cache line size 08 ~ Interrupt: pin A routed to IRQ 11 ~ Region 0: I/O ports at ac00 [disabled] [size=256] ~ Region 1: Memory at d7000000 (32-bit, non-prefetchable) [size=4K] ~ Expansion ROM at <unassigned> [disabled] [size=64K]
00:0e.0 Unknown mass storage controller: Triones Technologies, Inc. HPT366/368/370/370A/372 (rev 04) ~ Subsystem: Triones Technologies, Inc. HPT370A ~ Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- ~ Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- ~ Latency: 120 (2000ns min, 2000ns max) ~ Interrupt: pin A routed to IRQ 10 ~ Region 0: I/O ports at b000 [size=8] ~ Region 1: I/O ports at b400 [size=4] ~ Region 2: I/O ports at b800 [size=8] ~ Region 3: I/O ports at bc00 [size=4] ~ Region 4: I/O ports at c000 [size=256] ~ Expansion ROM at <unassigned> [disabled] [size=128K] ~ Capabilities: [60] Power Management version 2 ~ Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) ~ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: nVidia Corporation NV5M64 [RIVA TNT2 Model 64/Model 64 Pro] (rev 15) (prog-if 00 [VGA]) ~ Subsystem: CardExpert Technology: Unknown device 0000 ~ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- ~ Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- ~ Latency: 32 (1250ns min, 250ns max) ~ Interrupt: pin A routed to IRQ 12 ~ Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=16M] ~ Region 1: Memory at d2000000 (32-bit, prefetchable) [size=32M] ~ Expansion ROM at <unassigned> [disabled] [size=64K] ~ Capabilities: [60] Power Management version 1 ~ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) ~ Status: D0 PME-Enable- DSel=0 DScale=0 PME- ~ Capabilities: [44] AGP version 2.0 ~ Status: RQ=31 SBA- 64bit- FW- Rate=x1,x2,x4 ~ Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
- --------------------------------------------------------------------------------- here are the log from my 2nd board which is only wors with linux because ist the router. its a epox 8k9a.
00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400 AGP] Host Bridge ~ Subsystem: VIA Technologies, Inc. VT8377 [KT400 AGP] Host Bridge ~ Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- ~ Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- ~ Latency: 8 ~ Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M] ~ Capabilities: [a0] AGP version 2.0 ~ Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2,x4 ~ Command: RQ=31 SBA- AGP- 64bit- FW- Rate=<none> ~ Capabilities: [c0] Power Management version 2 ~ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) ~ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.0 PCI bridge: VIA Technologies, Inc. VT8235 PCI Bridge (prog-if 00 [Normal decode]) ~ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- ~ Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- ~ Latency: 0 ~ Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 ~ I/O behind bridge: 00009000-00009fff ~ Memory behind bridge: dc000000-ddffffff ~ Prefetchable memory behind bridge: d8000000-dbffffff ~ BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- ~ Capabilities: [80] Power Management version 2 ~ Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) ~ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) ~ Subsystem: Realtek Semiconductor Co., Ltd. RT8139 ~ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- ~ Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- ~ Latency: 32 (8000ns min, 16000ns max) ~ Interrupt: pin A routed to IRQ 19 ~ Region 0: I/O ports at a000 [size=256] ~ Region 1: Memory at df001000 (32-bit, non-prefetchable) [size=256]
00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) ~ Subsystem: Realtek Semiconductor Co., Ltd. RT8139 ~ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- ~ Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- ~ Latency: 32 (8000ns min, 16000ns max) ~ Interrupt: pin A routed to IRQ 19 ~ Region 0: I/O ports at a400 [size=256] ~ Region 1: Memory at df000000 (32-bit, non-prefetchable) [size=256]
00:0e.0 RAID bus controller: Triones Technologies, Inc. HPT374 (rev 07) ~ Subsystem: Triones Technologies, Inc.: Unknown device 0001 ~ Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- ~ Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- ~ Latency: 120 (2000ns min, 2000ns max) ~ Interrupt: pin A routed to IRQ 17 ~ Region 0: I/O ports at a800 [size=8] ~ Region 1: I/O ports at ac00 [size=4] ~ Region 2: I/O ports at b000 [size=8] ~ Region 3: I/O ports at b400 [size=4] ~ Region 4: I/O ports at b800 [size=256] ~ Expansion ROM at <unassigned> [disabled] [size=128K] ~ Capabilities: [60] Power Management version 2 ~ Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) ~ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0e.1 RAID bus controller: Triones Technologies, Inc. HPT374 (rev 07) ~ Subsystem: Triones Technologies, Inc.: Unknown device 0001 ~ Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- ~ Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- ~ Latency: 120 (2000ns min, 2000ns max) ~ Interrupt: pin A routed to IRQ 17 ~ Region 0: I/O ports at bc00 [size=8] ~ Region 1: I/O ports at c000 [size=4] ~ Region 2: I/O ports at c400 [size=8] ~ Region 3: I/O ports at c800 [size=4] ~ Region 4: I/O ports at cc00 [size=256] ~ Capabilities: [60] Power Management version 2 ~ Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) ~ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge ~ Subsystem: VIA Technologies, Inc. VT8235 ISA Bridge ~ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- ~ Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- ~ Latency: 0 ~ Capabilities: [c0] Power Management version 2 ~ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) ~ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP]) ~ Subsystem: Unknown device 1695:3005 ~ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- ~ Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- ~ Latency: 32 ~ Interrupt: pin A routed to IRQ 255 ~ Region 4: I/O ports at dc00 [size=16] ~ Capabilities: [c0] Power Management version 2 ~ Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) ~ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235 AC97 Audio Controller (rev 50) ~ Subsystem: Unknown device 1695:3005 ~ Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- ~ Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- ~ Interrupt: pin C routed to IRQ 12 ~ Region 0: I/O ports at e000 [size=256] ~ Capabilities: [c0] Power Management version 2 ~ Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) ~ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 PF/PRO AGP 4x TMDS (prog-if 00 [VGA]) ~ Subsystem: Giga-byte Technology: Unknown device 4005 ~ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- ~ Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- ~ Latency: 32 (2000ns min), cache line size 08 ~ Interrupt: pin A routed to IRQ 16 ~ Region 0: Memory at d8000000 (32-bit, prefetchable) [size=64M] ~ Region 1: I/O ports at 9000 [size=256] ~ Region 2: Memory at dd000000 (32-bit, non-prefetchable) [size=16K] ~ Expansion ROM at <unassigned> [disabled] [size=128K] ~ Capabilities: [50] AGP version 2.0 ~ Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2,x4 ~ Command: RQ=0 SBA+ AGP- 64bit- FW- Rate=<none> ~ Capabilities: [5c] Power Management version 2 ~ Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) ~ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
----- End forwarded message ----- Best regards, Stefan Reinauer