Re: [coreboot] ASRock e350m1 problems

[Tadas Slotkus]

Hi,

thank you all for the quick reply.
> If the DIMMs work with the production BIOS but not with your BIOS, it is 
> possible that you are using low cost modules that do not have a valid 
> SPD checksum. The coreboot project is configured to validate the SPD
> checksum, while the Asrock production BIOS is configured to ignore the
> SPD checksum. To test your coreboot using the DIMM SPD checksum ignore
> option, change BLDCFG_IGNORE_SPD_CHECKSUM in buildopts.c and try it that
> way.

I just tried that with fresh new tree, but the output remains the same.
(except build timestamps...).

The RAM is one dimm:
PATRIOT PSD32G13332H Desktop Memory Device Signature Line (DDR3
SDRAM,2GB,1333MHz(PC3-10600),CL9,256 x 64,DIMM 240-pin,Unbuffered)

Thanks,
Tadas