Stefan Reinauer schrieb:
- Christian Sühs chris@suehsi.de [060516 14:39]:
I have created my own irq_tables.c file with getpir.
pirq tables of factory bios are very often incomplete or wrong. One reason is that pirq and mptable are not used by the OS when ACPI is active. (Well, talking Linux) So this is an untested (and usually unused) path.
ACPI is not enabled in the kernel. What about the bios parameters? There is a switch to enable/disable for pnp os intalled. Eventually there are differences if I run getpir in both cases? Or should I set the IRQs manually in the bios before I run getpir.
USB should get an IRQ, audio as well, probably. Don't think you need one for VGA? What does your factory bios say?
All devices gets an IRQ.
Nope. you have to write support in form of mptable, pirq or ACPI to get this working.