Re: Passes RAM test, but hangs at jumping to RAM

[Andrew Ip]

Do you have option CONFIG_COMPRESS=0

-Andrew

On Thu, May 15, 2003 at 06:37:17PM +0900, SONE Takeshi wrote:
> What could be a problem when it passes RAM test but hangs 
> immediately after jumping to RAM?
>
> I'm developing a new raminit code and
> this happens only with a particular installation of DIMM.
> DIMM itself is not bad, it works when move to another slot,
> or another slot is filled with another DIMM.
> Award BIOS runs just fine with this DIMM installation.
>
> LinuxBIOS-1.0.0 Thu May 15 07:27:04 JST 2003 starting...
> Enabled first bank of RAM: 0x10000000 bytes
> Testing SDRAM : 00000000-0009ffff
> SDRAM fill:
> 0009ffff
> SDRAM verify:
> 0009ffff
> Done.
> Testing SDRAM : 00100000-01000000
> SDRAM fill:
> 01000000
> SDRAM verify:
> 01000000
> Done.
> Copying LinuxBIOS to ram.
> Jumping to LinuxBIOS.
> (hangs up here)