i am using a epia-m 600 with success. current cvs of freebios/linuxbios version1 works fine.
i used: === $ cat ../example.config | grep -v ^# | grep -v ^$ target /home/niki/packages/freebios-20031024-build mainboard via/epia-m option SERIAL_CONSOLE=1 option TTYS0_BAUD=115200 option DEFAULT_CONSOLE_LOGLEVEL=9 option DEBUG=1 option RAMTEST=1 option USE_GENERIC_ROM=1 option STD_FLASH=1 option ROM_SIZE=262144 option PAYLOAD_SIZE=196608 option USE_ELF_BOOT=1 payload /home/niki/packages/filo-0.4/filo.elf ===
there is currently a problem with the speed of the serial port. it might be a baudrate less (in my case it is 57600 although i specified 115200).
i can send you my romimage for testing if you want.
gcc: 3.3.1 binutils: 2.14 (should not matter)
system: my own ;-) === busybox/1.0.0pre3 freeswan/2.04 gmp/4.1.2 ipsec-tools/0.2.2 iptables/1.2.9 libol/0.3.11 mawk/1.1.3 ntp/4.2.0 openssh/3.7.1p2 openssl/0.9.7c pcsc-lite/1.2.0 ppp/20031029 rp-pppoe/3.5 setserial/2.17 syslog-ng/1.6.0rc4 tinylogin/1.4 uclibc/0.9.22 util-linux/2.12 zlib/1.1.4.1 ===
niki
On 21-Nov-2003 Dmitry Borisov wrote:
Some additional info that might help.
gcc (GCC) 3.2 20020903 (Red Hat Linux 8.0 3.2-7) GNU assembler 2.13.90.0.2 20020802
Dmitry/ ----- Original Message ----- From: Dmitry Borisov To: linuxbios@clustermatic.org Sent: Thursday, November 20, 2003 11:11 PM Subject: EPIA-M 600 Cannot start
My respect to all. I've got problem trying to burn linuxbios into EPIA-M 600. Config file attached if it could help. When I burn image and restart mb, it does not say anything to the serial. Even singl
e
character. Here is the output from flash_rom utility:
SST39SF020A found at physical address: 0xfffc0000 Part is SST39SF020A Programming Page: 0063 at address: 0x0003f000
Sorry, that's pretty much I have from linuxbios to share.
I wonder if anyone having EPIA-M 600 could send me the correct config file and correct romimage as well or let me know when I'm wrong. Appreciate your help, Dmitry/