it is part of the result of booting linux bios on my epia board
but i'm not sure I'm doing right........... it's almost end of it...........
Wrote linuxbios table at: 00000500 - 0000068c checksum a514
Welcome to elfboot, the open sourced starter. January 2002, Eric Biederman. Version 1.2
37:init_bytes() - zkernel_start:0xfff00000 zkernel_mask:0x0000ffff Found ELF candiate at offset 0 New segment addr 0x94000 size 0x7328 offset 0x60 filesize 0x37e0 (cleaned up) New segment addr 0x94000 size 0x7328 offset 0x60 filesize 0x37e0 Loading Segment: addr: 0x0000000000094000 memsz: 0x0000000000007328 filesz: 0x00Clearing Segment: addr: 0x00000000000977e0 memsz: 0x0000000000003b48 Jumping to boot code at 0x94000 ROM segment 0xffff length 0xfffe reloc 0x9400 Etherboot 5.0.8 (GPL) Tagged ELF for [VIA 86C100] Boot from (N)etwork or from (L)ocal? clocks_per_tick = 504391 N Probing...[VIA 86C100]Found VIA 6102 ROM address 0x0000 rhine.c v1.0.0 2000-01-07 IO address 1800 Ethernet Address: 00:40:63:CB:C8:11 Analyzing Media type,this will take several seconds........OK Linespeed=100Mbs Halfduplex The PCI BIOS has not enabled this device! Updating PCI command 0003->0007. pci_bus 00 pci_device_fn 90 Searching for server (DHCP)... ..................
_________________________________________________________________ 보다 빠르고 보기 편한 뉴스. 오늘의 화제는 MSN 뉴스에서 확인하세요. http://www.msn.co.kr/news/