Re: [LinuxBIOS] Question about AMD/Cyrix Geode GX1 based system

[Stefan Reinauer]

* Juergen Beisert  [060529 18:37]:
> With write enabled E and F segments this message changes to:
> ....
> Devices initialized
> Copying IRQ routing tables to 0xf0000...done.
> Verifing copy of IRQ routing tables at 0xf0000...done
> Checking IRQ routing table consistency...
> check_pirq_routing_table() - irq_routing_table located at: 0x000f0000
> done.

Can you provide a patch?
> But it still hangs after downloading the Linux kernel :-(

Have you enabled serial console in your kernel config?
and did you specify it on the kernel command line? (ie.
console=ttyS0,115200n8)

Stefan