Ok,
attachment: 1 File
first --> Lb boot log second -> lspci -vv third --> relevant segment of current Config.lb
lspci shows the 12.4 device ???!!!! Why
chris
ÿ
LinuxBIOS-1.1.8.0Fallback Tue Apr 25 20:27:38 CEST 2006 starting... Setting up default parameters for memory Sizing memory Probing for DIMM0 Found DIMM0 Page Size: 00001000 Component Banks: 4 Module Banks: 1 DIMM size: 04000000 Probing for DIMM1 MC_BANK_CFG = 00701420 Copying LinuxBIOS to ram. Jumping to LinuxBIOS. LinuxBIOS-1.1.8.0Fallback Tue Apr 25 20:27:38 CEST 2006 booting... end 3b6ae0d1, start 0 32-bit delta 375 calibrate_tsc 32-bit result is 375 clocks_per_usec: 375 Enumerating buses... scan_static_bus for Root Device Finding PCI configuration type. PCI: Using configuration type 1 PCI_DOMAIN: 0000 enabled PCI_DOMAIN: 0000 scanning... PCI: pci_scan_bus for bus 0 PCI: 00:00.0 [1078/0001] ops PCI: 00:00.0 [1078/0001] enabled PCI: devfn 0x8, bad id 0xffffffff PCI: devfn 0x10, bad id 0xffffffff PCI: devfn 0x18, bad id 0xffffffff PCI: devfn 0x20, bad id 0xffffffff PCI: devfn 0x28, bad id 0xffffffff PCI: devfn 0x30, bad id 0xffffffff PCI: devfn 0x38, bad id 0xffffffff PCI: devfn 0x40, bad id 0xffffffff PCI: 00:09.0 [10ea/5000] enabled PCI: devfn 0x49, bad id 0xffffffff PCI: devfn 0x4a, bad id 0xffffffff PCI: devfn 0x4b, bad id 0xffffffff PCI: devfn 0x4c, bad id 0xffffffff PCI: devfn 0x4d, bad id 0xffffffff PCI: devfn 0x4e, bad id 0xffffffff PCI: devfn 0x4f, bad id 0xffffffff PCI: devfn 0x50, bad id 0xffffffff PCI: devfn 0x58, bad id 0xffffffff PCI: devfn 0x60, bad id 0xffffffff PCI: devfn 0x68, bad id 0xffffffff PCI: devfn 0x70, bad id 0xffffffff PCI: devfn 0x78, bad id 0xffffffff PCI: devfn 0x80, bad id 0xffffffff PCI: devfn 0x88, bad id 0xffffffff PCI: 00:12.0 [1078/0100] bus ops southbridge_enable: dev is 0000e120 PCI: 00:12.0 [1078/0100] enabled PCI: 00:12.1 [1078/0101] disabled PCI: 00:12.2 [1078/0102] ops cs5530_ide: ide_enable PCI: 00:12.2 [1078/0102] enabled PCI: 00:12.3 [1078/0103] disabled PCI: 00:12.4 [1078/0104] disabled PCI: devfn 0x95, bad id 0xffffffff PCI: devfn 0x96, bad id 0xffffffff PCI: devfn 0x97, bad id 0xffffffff malloc Enter, size 668, free_mem_ptr 00016000 malloc 0x00016000 PCI: 00:13.0 [0e11/a0f8] enabled PCI: devfn 0xa0, bad id 0xffffffff PCI: devfn 0xa8, bad id 0xffffffff PCI: devfn 0xb0, bad id 0xffffffff PCI: devfn 0xb8, bad id 0xffffffff PCI: devfn 0xc0, bad id 0xffffffff PCI: devfn 0xc8, bad id 0xffffffff PCI: devfn 0xd0, bad id 0xffffffff PCI: devfn 0xd8, bad id 0xffffffff PCI: devfn 0xe0, bad id 0xffffffff PCI: devfn 0xe8, bad id 0xffffffff PCI: devfn 0xf0, bad id 0xffffffff PCI: devfn 0xf8, bad id 0xffffffff scan_static_bus for PCI: 00:12.0 PNP: 002e.0 enabled PNP: 002e.1 enabled PNP: 002e.2 enabled PNP: 002e.3 disabled PNP: 002e.4 enabled PNP: 002e.5 enabled PNP: 002e.6 enabled PNP: 002e.7 enabled PNP: 002e.8 enabled scan_static_bus for PCI: 00:12.0 done PCI: pci_scan_bus returning with max=00 scan_static_bus for Root Device done done Allocating resources... Reading resources... Root Device compute_allocate_io: base: 00000400 size: 00000000 align: 0 gran: 0 Root Device read_resources bus 0 link: 0 northbridge.c:pci_domain_read_resources() PCI_DOMAIN: 0000 read_resources bus 0 link: 0 PCI_DOMAIN: 0000 read_resources bus 0 link: 0 done Root Device read_resources bus 0 link: 0 done PCI: 00:12.2 20 * [0x00000400 - 0x0000047f] io Root Device compute_allocate_io: base: 00000480 size: 00000080 align: 7 gran: 0 done Root Device compute_allocate_mem: base: 00000000 size: 00000000 align: 0 gran: 0 Root Device read_resources bus 0 link: 0 Root Device read_resources bus 0 link: 0 done PCI: 00:09.0 10 * [0x00000000 - 0x00ffffff] mem PCI: 00:13.0 10 * [0x01000000 - 0x01000fff] mem Root Device compute_allocate_mem: base: 01001000 size: 01001000 align: 24 gran: 0 done Done reading resources. Setting resources... Root Device compute_allocate_io: base: 00001000 size: 00000080 align: 7 gran: 0 Root Device read_resources bus 0 link: 0 Root Device read_resources bus 0 link: 0 done PCI: 00:12.2 20 * [0x00001000 - 0x0000107f] io Root Device compute_allocate_io: base: 00001080 size: 00000080 align: 7 gran: 0 done Root Device compute_allocate_mem: base: fd000000 size: 01001000 align: 24 gran: 0 Root Device read_resources bus 0 link: 0 Root Device read_resources bus 0 link: 0 done PCI: 00:09.0 10 * [0xfd000000 - 0xfdffffff] mem PCI: 00:13.0 10 * [0xfe000000 - 0xfe000fff] mem Root Device compute_allocate_mem: base: fe001000 size: 01001000 align: 24 gran: 0 done Root Device assign_resources, bus 0 link: 0 BC_DRAM_TOP = 0x03bfffff MC_GBASE_ADD = 0x00000078 I would set ram size to 60 Mbytes PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0 PCI: 00:09.0 10 <- [0x00fd000000 - 0x00fdffffff] mem PCI: 00:09.0 30 <- [0x00fffc0000 - 0x00fffcffff] romem PCI: 00:12.2 20 <- [0x0000001000 - 0x000000107f] io PCI: 00:13.0 10 <- [0x00fe000000 - 0x00fe000fff] mem PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0 Root Device assign_resources, bus 0 link: 0 Done setting resources. Done allocating resources. Enabling resources... PCI: 00:00.0 cmd <- 147 PCI: 00:09.0 subsystem <- 00/00 PCI: 00:09.0 cmd <- 142 cs5530.c: cs5530_pci_dev_enable_resources() PCI: 00:12.0 cmd <- 14f PCI: 00:12.2 cmd <- 141 PCI: 00:13.0 cmd <- 142 done. Initializing devices... Root Device init PCI: 00:00.0 init northbridge: northbridge_init() PCI: 00:09.0 init PCI: 00:12.0 init cs5530: southbridge_init PNP: 002e.0 init PNP: 002e.1 init PNP: 002e.2 init PNP: 002e.4 init PNP: 002e.5 init PNP: 002e.6 init PNP: 002e.7 init PNP: 002e.8 init PCI: 00:12.2 init cs5530_ide: ide_init PCI: 00:13.0 init Devices initialized Copying IRQ routing tables to 0xf0000...done. Verifing copy of IRQ routing tables at 0xf0000...failed Moving GDT to 0x500...ok Wrote linuxbios table at: 00000530 - 000006c4 checksum f09f
Welcome to elfboot, the open sourced starter. January 2002, Eric Biederman. Version 1.3
-----------------------------------------------------------------------
# lspci -vv 00:00.0 0600: 1078:0001 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0
00:09.0 0300: 10ea:5000 (rev 02) Subsystem: 0202:0202 Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 0 Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Expansion ROM at fffc0000 [disabled] [size=64K]
00:12.0 0601: 1078:0100 Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size 04
00:12.1 0680: 1078:0101 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Region 0: Memory at 10000000 (32-bit, non-prefetchable) [disabled] [size=256]
00:12.2 0101: 1078:0102 (prog-if 80) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Region 4: I/O ports at 1000 [size=128]
00:12.3 0401: 1078:0103 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Region 0: Memory at 10000100 (32-bit, non-prefetchable) [disabled] [size=128]
00:12.4 0300: 1078:0104 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Region 0: Memory at 10001000 (32-bit, non-prefetchable) [disabled] [size=4K]
00:13.0 0c03: 0e11:a0f8 (rev 06) (prog-if 10) Subsystem: 0e11:a0f8 Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 0 Region 0: Memory at fe000000 (32-bit, non-prefetchable) [size=4K]
#
--------------------------------------------------------------------
## ## Include the secondary Configuration files ## dir /pc80 config chip.h
chip northbridge/amd/gx1 device pci_domain 0 on device pci 0.0 on end chip drivers/pci/onboard device pci 9.0 on end register "rom_address" = "0xfffc0000" end # end chip southbridge/amd/cs5530 device pci 12.0 on chip superio/NSC/pc97317 device pnp 2e.0 on # Keyboard io 0x60 = 0x60 io 0x62 = 0x64 irq 0x70 = 1 end device pnp 2e.1 on # Mouse irq 0x70 = 12 end device pnp 2e.2 on # RTC io 0x60 = 0x70 irq 0x70 = 8 end device pnp 2e.3 off # FDC end device pnp 2e.4 on # Parallel Port io 0x60 = 0x378 irq 0x70 = 7 end device pnp 2e.5 on # COM2 io 0x60 = 0x2f8 irq 0x70 = 3 end device pnp 2e.6 on # COM1 io 0x60 = 0x3f8 irq 0x70 = 4 end device pnp 2e.7 on # GPIO io 0x60 = 0xe0 end device pnp 2e.8 on # Power Management io 0x60 = 0xe800 end register "com1" = "{115200}" register "com2" = "{38400}" end end device pci 12.1 off end # SMI device pci 12.2 on end # IDE device pci 12.3 off end # Audio device pci 12.4 off end # VGA end
chip cpu/amd/model_gx1 end end end