Uwe, Ron & List,
Jerome, can you try two things on the board:
- Only use _one_ DIMM (if you used more for the first test), AFAIK there are some issues with multiple DIMMs, but I'm not sure yet.
That's what I had in mind, I will proceed accordingly and report my findings to the list.
Also check the population rules in the board manual, not all slots are allowed.
No, I believe that might be fine as all the memory sticks are identical and perfectly working with the original bios. Please note that I have 4x512MB sticks on this motherboard, which is therefore fully populated.
- Try a different DIMM (different speed settings, vendor, whatever).
Again, I doubt this is the issue, but I will certainly try.
Also, please change all '#if 0' lines in cache_as_ram_auto.c to '#if 1' in order to enable more debugging output which might be useful, and repost the updated minicom log then.
Very well, I will also include the memory type I am currently using.
Thanks, Jerome Ibanes