Re: [LinuxBIOS] alix1c for v3 update

[Peter Stuge]

On Tue, Nov 27, 2007 at 08:02:02AM -0800, ron minnich wrote:
> +++ mainboard/pcengines/alix1c/stage1.c	(working copy)
>
> +#define SERIAL_DEV W83627HF_SP1
> +#define SERIAL_IOBASE 0x3f8
> +++ mainboard/pcengines/alix1c/dts	(working copy)
> @@ -37,5 +37,9 @@
>    		pcipath = "0xf,1";
>    		enabled;
>    	};
> superio {
> 	/config/("superio/winbond/w83627hf");
> 	com1enable = "1";
> };

Why is the port needed in stage1.c?

I would like it to be tied either to the superio (preferably) or in
the dts, if there is positively no other place to put it.

//Peter