On Sat, 2006-03-25 at 03:26 -0600, Richard Smith wrote:
- The attached diff sets up a config for the Advantech gx533 eval board I have.
- It also adds some verbosity and pass fail logic to the ram test.
Since the ram test always printed "DRAM verified" regardless of pass or fail I worked for a long time trying to understand why I died when I jumped to RAM. When the real reason was that my RAM is hosed.
Are you sure the value to set to msr 0x20000018 and 0x20000019 are correct? The value is for the rumba board with 256MB DDR.