Re: [coreboot] and/or busybox issue with alix2c3 serial console

[Roman Yeryomin]

On Wed, Nov 5, 2008 at 3:24 AM, Jordan Crouse  wrote:
> It just occured to me, I use a busybox based image for my Geode... :)
>
> I gzipped up the ext2 filesystem and put it here:
>
> http://www.infradead.org/~jcrouse/geode.rootfs.ext2.gz
>
> This uses busybox 1.9.2 and kernel 2.6.27.   There is a menu.lst in /boot,
> but the root points to the wrong place.  Use
>
> kernel /boot/bzImage root=/dev/hda1 console=tty0 console=ttyS0,115200
>
> I just booted it with a fresh version of v3 and all was well.  Good
> luck.

Tried your image but no luck. Same behaviour. No serial console.
All it gave to serial console while booting is in attachment.
Does it have some ip address and telnet/ssh server? So I could at
least ping it and see if it booted at all.

Roman