I think the flash write enabled, I use this :
setpci -s 0:11.0 40.b=54
I've read that this should enable writting, but i'm not sure.
Here is my flash_rom output:
Calibrating timer since microsleep sucks ... takes a second Setting up microsecond timing loop 184M loops per second Ok, calibrated, now do the deed Trying Am29F040B, 512 KB probe_29f040b: id1 0xff, id2 0xff Trying At29C040A, 512 KB probe_jedec: id1 0xff, id2 0xff Trying Mx29f002, 256 KB probe_29f002: id1 255, id2 255 Trying SST29EE020A, 256 KB probe_jedec: id1 0xff, id2 0xff Trying SST28SF040A, 512 KB probe_28sf040: id1 0xff, id2 0xff Trying SST39SF020A, 256 KB probe_39sf020: id1 0xff, id2 0xff Trying SST39VF020, 256 KB probe_39sf020: id1 0xff, id2 0xff Trying W29C011, 128 KB probe_jedec: id1 0xff, id2 0xff Trying W29C020C, 256 KB probe_jedec: id1 0xff, id2 0xff Trying W49F002U, 256 KB probe_49f002: id1 0xff, id2 0xff Trying M29F400BT, 512 KB probe_m29f400bt: id1 0xff, id2 0xff Trying 82802ab, 512 KB probe_82802ab: id1 0xff, id2 0xff Trying 82802ac, 1024 KB probe_82802ab: id1 0xff, id2 0xff EEPROM not found
Mine is a 39SF020A (it's written on the chip)
thanks. -------------------------------------------------- Oreka ! Nous sommes l'internet moins cher ! Surfez 25% moins cher avec http://www.oreka.com