home# dmesg | grep -i tty [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-16-generic
root=UUID=b2b7f7fa-b1db-4e97-
941f-8aaee291f3dc ro console=tty1 console=ttyS0,115200n8 quiet splash
vt.handoff=7
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-16-generic
root=UUID=b2b7f7fa-b1db-
4e97-941f-8aaee291f3dc ro console=tty1 console=ttyS0,115200n8 quiet
splash vt.handoff=7
[ 0.000000] console [tty1] enabled [ 0.000000] console [ttyS0] enabled [ 1.637664] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is
a 16550A
[ 1.658835] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud =
115200) is a 16550A
[ 3.412478] fbcon: Remapping primary device, fb1, to tty 1-63 [ 44.378835] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 44.380198] systemd[1]: Created slice system-getty.slice.
_______
Hello Cheng,
Please, try to do the following: lspci -vv (to find your serial on PCIe), then try to remap your IRQs, to see if this will somehow work.
Example: setserial /dev/ttyS0 port 0xd800 UART 16550A irq 5 setserial /dev/ttyS0 -av /dev/ttyS0, Line 0, UART: 16550A, Port: 0xd800, IRQ: 5 Baud_base: 115200, close_delay: 5000, divisor: 0 closing_wait: 37856 Flags: spd_normal skip_test
Something like described on this web pointer: https://forums.gentoo.org/viewtopic-t-249041-start-0.html
Please, report your attempts/results here.
Thank you, Zoran
On Mon, Jul 25, 2016 at 4:33 AM, cheng yichen blessyichen@gmail.com wrote:
Hi all
After i follow kontron/ktqm77 setting. I can't solve the issue. I try to change iqr(for com1) to 5 or 6. but system can't print linux message and minicom is not workable.
dump from superiotool Found Winbond W83627DHG-P/-PT (id=0xb0, rev=0x73) at 0x2e Register dump: idx 02 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f val ff b0 73 ff 00 42 00 00 ff 50 80 00 00 eb 21 00 ff def 00 b0 NA ff 00 MM 00 MM RR 50 00 00 RR e2 21 00 00 LDN 0x00 (Floppy) idx 30 60 61 70 74 f0 f1 f2 f4 f5 val 01 03 f0 06 02 8e 00 ff 00 00 def 01 03 f0 06 02 8e 00 ff 00 00 LDN 0x01 (Parallel port) idx 30 60 61 70 74 f0 val 01 03 78 07 04 3f def 01 03 78 07 04 3f LDN 0x02 (COM1) idx 30 60 61 70 f0 val 01 03 f8 04 40 def 01 03 f8 04 00 LDN 0x03 (COM2) idx 30 60 61 70 f0 f1 val 01 02 f8 03 40 00 def 01 02 f8 03 00 00 LDN 0x05 (Keyboard)
dump from dmesg
home# dmesg | grep -i tty [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-16-generic root=UUID=b2b7f7fa-b1db-4e97-941f-8aaee291f3dc ro console=tty1 console=ttyS0,115200n8 quiet splash vt.handoff=7 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-16-generic root=UUID=b2b7f7fa-b1db-4e97-941f-8aaee291f3dc ro console=tty1 console=ttyS0,115200n8 quiet splash vt.handoff=7 [ 0.000000] console [tty1] enabled [ 0.000000] console [ttyS0] enabled [ 1.637664] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.658835] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 3.412478] fbcon: Remapping primary device, fb1, to tty 1-63 [ 44.378835] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 44.380198] systemd[1]: Created slice system-getty.slice.
2016-07-22 20:24 GMT+08:00 Kyösti Mälkki kyosti.malkki@gmail.com:
On Fri, Jul 22, 2016 at 1:14 PM, cheng yichen blessyichen@gmail.com wrote:
Hi all
My platform is braswell SOC with W83627dhg superIO. In post stage I can
get
debug message over w83627 uart1(3f8/irq4). but after boot to linux, uart port is not woarkable. I test the function by minicom but I can't
receive
and send data. I can get uart information by dmesg command. How to initial it in corebooot?
Does not sound like a coreboot issue to me.
Do you have CTS/RTS hardware handshake disabled in minicom configuration? If you directed kernel console to serial port, you should not (cannot) use the port for user apps.
HTH, Kyösti
-- coreboot mailing list: coreboot@coreboot.org https://www.coreboot.org/mailman/listinfo/coreboot